The Future of Z-Wave in HA - QT-OpenZWave

ptdalen · October 3, 2020, 7:18pm

Oddly enough when I turned on the light it did send a refresh value, just not when I turned it off. I only have two dimmers that are having this issue. Weirdly enough they are newer GE Zwave plus. I have older GE dimmers that I used to have to set up polling with the previous intergration and those are working fine.

I dont turn these on/off that often, so I think I’ll just live with the extra bit of poling and just poll the entire node, which works great.

Thanks for helping me troubleshoot, learned a good amount how the data flows

freshcoast · October 3, 2020, 7:20pm

I think because the value did not change, HA never updated the state, so no trigger. Another way to do this would be to use an MQTT trigger, and trigger off of the setvalue command instead for the value id.

That approach is basically a re-implementation of the old zwave refresh_value config setting.

sender · October 4, 2020, 5:43pm

Since last 3 evenings I have a crashed zwave network, although, I am not sure what is wrong, but no zwave device responds and I have the following logging. After restarting the add-on everything comes alive.

What is this “Qvariant” thing/message?

[20201004 19:37:37.576 CEST] [default] [debug]: QVariant(int, 21) 
[20201004 19:37:37.576 CEST] [default] [debug]: QVariant(int, 22) 
[20201004 19:37:37.576 CEST] [default] [debug]: QVariant(int, 23) 
[20201004 19:37:37.576 CEST] [default] [debug]: QVariant(int, 24) 
[20201004 19:38:07.573 CEST] [default] [debug]: QVariant(int, 1) 
[20201004 19:38:07.573 CEST] [default] [debug]: QVariant(int, 2) 
[20201004 19:38:07.573 CEST] [default] [debug]: QVariant(int, 3) 
[20201004 19:38:07.574 CEST] [default] [debug]: QVariant(int, 4) 
[20201004 19:38:07.574 CEST] [default] [debug]: QVariant(int, 5) 
[20201004 19:38:07.574 CEST] [default] [debug]: QVariant(int, 7) 
[20201004 19:38:07.574 CEST] [default] [debug]: QVariant(int, 8) 
[20201004 19:38:07.575 CEST] [default] [debug]: QVariant(int, 9) 
[20201004 19:38:07.575 CEST] [default] [debug]: QVariant(int, 10) 
[20201004 19:38:07.575 CEST] [default] [debug]: QVariant(int, 11) 
[20201004 19:38:07.575 CEST] [default] [debug]: QVariant(int, 12) 
[20201004 19:38:07.575 CEST] [default] [debug]: QVariant(int, 13) 
[20201004 19:38:07.575 CEST] [default] [debug]: QVariant(int, 14) 
[20201004 19:38:07.575 CEST] [default] [debug]: QVariant(int, 15) 
[20201004 19:38:07.576 CEST] [default] [debug]: QVariant(int, 16) 
[20201004 19:38:07.576 CEST] [default] [debug]: QVariant(int, 17) 
[20201004 19:38:07.576 CEST] [default] [debug]: QVariant(int, 18) 
[20201004 19:38:07.576 CEST] [default] [debug]: QVariant(int, 19) 
[20201004 19:38:07.576 CEST] [default] [debug]: QVariant(int, 20) 
[20201004 19:38:07.576 CEST] [default] [debug]: QVariant(int, 21) 
[20201004 19:38:07.577 CEST] [default] [debug]: QVariant(int, 22) 
[20201004 19:38:07.577 CEST] [default] [debug]: QVariant(int, 23) 
[20201004 19:38:07.577 CEST] [default] [debug]: QVariant(int, 24) 
[20201004 19:38:35.573 CEST] [ozw.mqtt.publisher] [debug]: "Sun Oct 4 19:38:35 2020 PingResponse\n" 
[20201004 19:38:37.574 CEST] [default] [debug]: QVariant(int, 1) 
[20201004 19:38:37.574 CEST] [default] [debug]: QVariant(int, 2) 
[20201004 19:38:37.574 CEST] [default] [debug]: QVariant(int, 3) 
[20201004 19:38:37.574 CEST] [default] [debug]: QVariant(int, 4) 
[20201004 19:38:37.574 CEST] [default] [debug]: QVariant(int, 5) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 7) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 8) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 9) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 10) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 11) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 12) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 13) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 14) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 15) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 16) 
[20201004 19:38:37.575 CEST] [default] [debug]: QVariant(int, 17) 
[20201004 19:38:37.576 CEST] [default] [debug]: QVariant(int, 18) 
[20201004 19:38:37.576 CEST] [default] [debug]: QVariant(int, 19) 
[20201004 19:38:37.576 CEST] [default] [debug]: QVariant(int, 20) 
[20201004 19:38:37.576 CEST] [default] [debug]: QVariant(int, 21) 
[20201004 19:38:37.576 CEST] [default] [debug]: QVariant(int, 22) 
[20201004 19:38:37.576 CEST] [default] [debug]: QVariant(int, 23) 
[20201004 19:38:37.576 CEST] [default] [debug]: QVariant(int, 24) 
[20201004 19:39:07.573 CEST] [default] [debug]: QVariant(int, 1) 
[20201004 19:39:07.574 CEST] [default] [debug]: QVariant(int, 2) 
[20201004 19:39:07.574 CEST] [default] [debug]: QVariant(int, 3) 
[20201004 19:39:07.574 CEST] [default] [debug]: QVariant(int, 4) 
[20201004 19:39:07.574 CEST] [default] [debug]: QVariant(int, 5) 
[20201004 19:39:07.574 CEST] [default] [debug]: QVariant(int, 7) 
[20201004 19:39:07.574 CEST] [default] [debug]: QVariant(int, 8) 
[20201004 19:39:07.574 CEST] [default] [debug]: QVariant(int, 9) 
[20201004 19:39:07.575 CEST] [default] [debug]: QVariant(int, 10) 
[20201004 19:39:07.575 CEST] [default] [debug]: QVariant(int, 11) 
[20201004 19:39:07.575 CEST] [default] [debug]: QVariant(int, 12) 
[20201004 19:39:07.575 CEST] [default] [debug]: QVariant(int, 13) 
[20201004 19:39:07.575 CEST] [default] [debug]: QVariant(int, 14) 
[20201004 19:39:07.575 CEST] [default] [debug]: QVariant(int, 15) 
[20201004 19:39:07.575 CEST] [default] [debug]: QVariant(int, 16) 
[20201004 19:39:07.576 CEST] [default] [debug]: QVariant(int, 17) 
[20201004 19:39:07.576 CEST] [default] [debug]: QVariant(int, 18) 
[20201004 19:39:07.576 CEST] [default] [debug]: QVariant(int, 19) 
[20201004 19:39:07.576 CEST] [default] [debug]: QVariant(int, 20) 
[20201004 19:39:07.576 CEST] [default] [debug]: QVariant(int, 21) 
[20201004 19:39:07.576 CEST] [default] [debug]: QVariant(int, 22) 
[20201004 19:39:07.576 CEST] [default] [debug]: QVariant(int, 23) 
[20201004 19:39:07.577 CEST] [default] [debug]: QVariant(int, 24) 
[20201004 19:39:35.573 CEST] [ozw.mqtt.publisher] [debug]: "Sun Oct 4 19:39:35 2020 PingResponse\n" 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 1) 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 2) 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 3) 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 4) 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 5) 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 7) 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 8) 
[20201004 19:39:37.574 CEST] [default] [debug]: QVariant(int, 9) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 10) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 11) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 12) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 13) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 14) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 15) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 16) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 17) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 18) 
[20201004 19:39:37.575 CEST] [default] [debug]: QVariant(int, 19) 
[20201004 19:39:37.576 CEST] [default] [debug]: QVariant(int, 20) 
[20201004 19:39:37.576 CEST] [default] [debug]: QVariant(int, 21) 
[20201004 19:39:37.576 CEST] [default] [debug]: QVariant(int, 22) 
[20201004 19:39:37.576 CEST] [default] [debug]: QVariant(int, 23) 
[20201004 19:39:37.576 CEST] [default] [debug]: QVariant(int, 24)

After restart and working I also have some of these message:

[20201004 19:44:08.874 CEST] [ozw.library] [info]: Info - Node: 11 Received SwitchBinary report from node 11: level=On 
[20201004 19:44:08.874 CEST] [ozw.library] [debug]: Detail - Node: 11 Value Updated: old value=true, new value=true, type=bool 
[20201004 19:44:08.874 CEST] [ozw.library] [debug]: Detail - Node: 11 Changes to this value are not verified 
[20201004 19:44:08.875 CEST] [ozw.library] [debug]: Detail - Node: 11 Notification: ValueRefreshed CC: COMMAND_CLASS_SWITCH_BINARY Instance: 2 Index: 0 
[20201004 19:44:08.875 CEST] [ozw.notifications] [debug]: Notification pvt_valueRefreshed:  189349920 Thread:  0x7f6bb0984d48 
[20201004 19:44:08.876 CEST] [ozw.mqtt.publisher] [debug]: Publishing Event valueRefreshed: 189349920 
[20201004 19:44:11.574 CEST] [default] [debug]: QVariant(int, 1) 
[20201004 19:44:11.574 CEST] [default] [debug]: QVariant(int, 2) 
[20201004 19:44:11.575 CEST] [default] [debug]: QVariant(int, 3) 
[20201004 19:44:11.575 CEST] [default] [debug]: QVariant(int, 4) 
[20201004 19:44:11.575 CEST] [default] [debug]: QVariant(int, 5) 
[20201004 19:44:11.575 CEST] [default] [debug]: QVariant(int, 7) 
[20201004 19:44:11.575 CEST] [default] [debug]: QVariant(int, 8) 
[20201004 19:44:11.575 CEST] [default] [debug]: QVariant(int, 9) 
[20201004 19:44:11.575 CEST] [default] [debug]: QVariant(int, 10) 
[20201004 19:44:11.576 CEST] [default] [debug]: QVariant(int, 11) 
[20201004 19:44:11.576 CEST] [default] [debug]: QVariant(int, 12) 
[20201004 19:44:11.576 CEST] [default] [debug]: QVariant(int, 13) 
[20201004 19:44:11.576 CEST] [default] [debug]: QVariant(int, 14) 
[20201004 19:44:11.576 CEST] [default] [debug]: QVariant(int, 15) 
[20201004 19:44:11.576 CEST] [default] [debug]: QVariant(int, 16) 
[20201004 19:44:11.576 CEST] [default] [debug]: QVariant(int, 17) 
[20201004 19:44:11.577 CEST] [default] [debug]: QVariant(int, 18) 
[20201004 19:44:11.577 CEST] [default] [debug]: QVariant(int, 19) 
[20201004 19:44:11.577 CEST] [default] [debug]: QVariant(int, 20) 
[20201004 19:44:11.577 CEST] [default] [debug]: QVariant(int, 21) 
[20201004 19:44:11.577 CEST] [default] [debug]: QVariant(int, 22) 
[20201004 19:44:11.577 CEST] [default] [debug]: QVariant(int, 23) 
[20201004 19:44:11.577 CEST] [default] [debug]: QVariant(int, 24) 
[20201004 19:44:14.533 CEST] [ozw.library] [debug]: Detail - Node: 11   Received: 0x01, 0x0d, 0x00, 0x04, 0x00, 0x0b, 0x07, 0x60, 0x0d, 0x01, 0x01, 0x25, 0x03, 0xff, 0x4e 
[20201004 19:44:14.533 CEST] [ozw.library] [info]: Info - Node: 11 Received a MultiChannelEncap from node 11, endpoint 1 for Command Class COMMAND_CLASS_SWITCH_BINARY 
[20201004 19:44:14.533 CEST] [ozw.library] [info]: Info - Node: 11 Received SwitchBinary report from node 11: level=On 
[20201004 19:44:14.533 CEST] [ozw.library] [debug]: Detail - Node: 11 Value Updated: old value=true, new value=true, type=bool 
[20201004 19:44:14.533 CEST] [ozw.library] [debug]: Detail - Node: 11 Changes to this value are not verified 
[20201004 19:44:14.534 CEST] [ozw.library] [debug]: Detail - Node: 11 Notification: ValueRefreshed CC: COMMAND_CLASS_SWITCH_BINARY Instance: 2 Index: 0 
[20201004 19:44:14.534 CEST] [ozw.notifications] [debug]: Notification pvt_valueRefreshed:  189349920 Thread:  0x7f6bb0984d48 
[20201004 19:44:14.535 CEST] [ozw.mqtt.publisher] [debug]: Publishing Event valueRefreshed: 189349920 
[20201004 19:44:15.553 CEST] [ozw.library] [debug]: Detail - Node: 11   Received: 0x01, 0x14, 0x00, 0x04, 0x00, 0x0b, 0x0e, 0x60, 0x0d, 0x01, 0x01, 0x32, 0x02, 0x21, 0x34, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x86 
[20201004 19:44:15.553 CEST] [ozw.library] [info]: Info - Node: 11 Received a MultiChannelEncap from node 11, endpoint 1 for Command Class COMMAND_CLASS_METER 
[20201004 19:44:15.553 CEST] [ozw.library] [info]: Info - Node: 11 Received Meter Report for Electric - W (1) with Units W (2) on Index 2: 3.6 
[20201004 19:44:15.553 CEST] [ozw.library] [debug]: Detail - Node: 11 Value Updated: old value=0.0, new value=3.6, type=decimal 
[20201004 19:44:15.553 CEST] [ozw.library] [debug]: Detail - Node: 11 Changes to this value are not verified 
[20201004 19:44:15.553 CEST] [ozw.library] [debug]: Detail - Node: 11 Value Updated: old value=false, new value=false, type=bool 
[20201004 19:44:15.553 CEST] [ozw.library] [debug]: Detail - Node: 11 Changes to this value are not verified 
[20201004 19:44:15.553 CEST] [ozw.library] [debug]: Detail - Node: 11 Notification: ValueChanged CC: COMMAND_CLASS_METER Instance: 2 Index: 2 
[20201004 19:44:15.553 CEST] [ozw.library] [debug]: Detail - Node: 11 Notification: ValueRefreshed CC: COMMAND_CLASS_METER Instance: 2 Index: 256 
[20201004 19:44:15.553 CEST] [ozw.notifications] [debug]: Notification pvt_valueChanged:  562950142984226 Thread:  0x7f6bb0984d48 
[20201004 19:44:15.554 CEST] [ozw.mqtt.publisher] [debug]: Publishing Event valueChanged: 562950142984226 
[20201004 19:44:15.554 CEST] [ozw.notifications] [debug]: Notification pvt_valueRefreshed:  72057594227490848 Thread:  0x7f6bb0984d48 
[20201004 19:44:15.555 CEST] [ozw.mqtt.publisher] [debug]: Publishing Event valueRefreshed: 72057594227490848 
[20201004 19:44:38.578 CEST] [ozw.mqtt.publisher] [debug]: "Sun Oct 4 19:44:38 2020 PingResponse\n" 
[20201004 19:44:41.576 CEST] [default] [debug]: QVariant(int, 1) 
[20201004 19:44:41.576 CEST] [default] [debug]: QVariant(int, 2) 
[20201004 19:44:41.576 CEST] [default] [debug]: QVariant(int, 3) 
[20201004 19:44:41.576 CEST] [default] [debug]: QVariant(int, 4) 
[20201004 19:44:41.576 CEST] [default] [debug]: QVariant(int, 5) 
[20201004 19:44:41.576 CEST] [default] [debug]: QVariant(int, 7) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 8) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 9) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 10) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 11) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 12) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 13) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 14) 
[20201004 19:44:41.577 CEST] [default] [debug]: QVariant(int, 15) 
[20201004 19:44:41.578 CEST] [default] [debug]: QVariant(int, 16) 
[20201004 19:44:41.578 CEST] [default] [debug]: QVariant(int, 17) 
[20201004 19:44:41.578 CEST] [default] [debug]: QVariant(int, 18) 
[20201004 19:44:41.578 CEST] [default] [debug]: QVariant(int, 19) 
[20201004 19:44:41.578 CEST] [default] [debug]: QVariant(int, 20) 
[20201004 19:44:41.578 CEST] [default] [debug]: QVariant(int, 21) 
[20201004 19:44:41.578 CEST] [default] [debug]: QVariant(int, 22) 
[20201004 19:44:41.579 CEST] [default] [debug]: QVariant(int, 23) 
[20201004 19:44:41.579 CEST] [default] [debug]: QVariant(int, 24)

ha_steve · October 4, 2020, 8:45pm

Looks like you are running into the bug that has been reported by several people. Here’s one report:

Hopefully fishwaldo will come back sometime soon…

nehalem · October 5, 2020, 11:38pm

Hi, I’m very new to HA and z-wave. I have a small working test network set up with the existing z-wave integration, which is working pretty well. There are some devices I was looking to add but it appears they require 1.6 support (like this: https://aeotec.com/z-wave-doorbell/).

I know OZW is still in beta but I’m curious if I should be using it as I’m planning on setting up a new z-wave network sometime early next year (but setting up a smaller network now to both test and use some functionality). Is it stable enough for this purpose or should you really only use it if you are working with the developers to harden it (which I might be willing to do but I have a lot to learn about the z-wave protocol, etc)?

firstof9 · October 6, 2020, 12:11am

You could always test it out before fully switching over as well.

frits1980 · October 6, 2020, 8:24am

The doorbell works in ozw, but not in HA. So it’s useless. This has nothing to do with ozw. But more to the fact that HA for years does not provide proper capability for a sound device other then a music speaker. I personally believe this is a shame. But it’s possible all developers just use a music speaker for this. So I don’t think this will be implemented any time soon.

nehalem · October 6, 2020, 2:46pm

That is disappointing to hear. I don’t understand enough about the architecture of HA (or z-wave for that matter) to know what is or is not supported. Dang.

freshcoast · October 6, 2020, 2:56pm

You can still control the siren using MQTT commands, just not with any build-in component. Not as friendly, but still usable.

nehalem · October 6, 2020, 4:04pm

Oh nice. But my initial question still kind of remains. Is this OpenZWave actually mature enough to use outside of a development environment? If it’s useable I might switch, or at least start testing as firstof9 suggested.

sender · October 6, 2020, 4:56pm

If you don’t hit the bugs () and can live with “how to’s” it’s touching stability. On the other hand… “compatibility” is little limited in my vies… I have a bunch of “mainstreamed” devices which are not really well supported in ozw1.6. but on the other hand, that is not the fault of the QT wrapper.

frits1980 · October 6, 2020, 8:29pm

How? Because I only get sensors in Mqtt. No controllable devices.

freshcoast · October 6, 2020, 8:42pm

You can publish MQTT commands to directly interact with nodes and their values. The setvalue command would let you use the Sound Switch command class values.

Use something like MQTT Explorer to see which values are exposed.

firstof9 · October 6, 2020, 10:32pm

If you could provide a mqtt.dump of the doorbell, I’d love to take a look and see what I could come up with.

Edit: Looks like it’s actually getting worked on

Hang in there

hermanh · October 7, 2020, 9:48am

For specific setvalue commands related to the aeotec doorbell have a look at this post : SetValue command

adamoutler · October 7, 2020, 11:57am

I hope, rather than continue to implement each device individually, the people looking at this give consideration to a generalized MQTT device. With MQTT the entire system is unified. MQTT works like a database. During device setup, HA would be easier to use if it could take a ZWave Node and display/select endpoint IDs by name.

There should be some way to:

Select a name
Select an icon
Set an action entity
Select a button/toggle/input type for the action
Set an indicator entity
Select a text/light/color for the indicator

It really should be that simple when dealing with MQTT. Then, later when we want to add “official” support:

Migrate these settings and selections to an official HA device where the user only needs to connect a device and the endpoints are all referenced by name and converted to endpoint IDs for fast runtime operations

phaeton · November 1, 2020, 8:17am

Is 150 still the most stable release or is there a new hidden gem in all the builds? I notice 150 after running for a while gets stuck and refreshing the node crashes the container.

sender · November 4, 2020, 11:03am

Hello, again I have a non responsive QT OpenZwave … If I restart it will work again but this is the status in the addon:

This happens ~2 times a week…

[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "On/Off Power Switch") 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(int, 1792) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(int, 5) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "Always On Slave") 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(int, 0) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "Z-Wave+ node") 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "Complete") 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "0x0159") 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "0x0002") 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "0x0051") 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(uint, 100000) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(int, 4) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(int, 8) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QBitArray, QBitArray(1011 0111 0)) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(int, 26) 
[20201104 12:01:15.736 CET] [default] [debug]: QVariant(QString, "") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Qubino (Goap)") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "ZMNHHDx Mini Dimmer") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Routing Slave") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 4) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Multilevel Switch") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 17) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Multilevel Power Switch") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 1) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Light Dimmer Switch") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 1536) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 5) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Always On Slave") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 0) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Z-Wave+ node") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "Complete") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "0x0159") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "0x0001") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(QString, "0x0055") 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(uint, 100000) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 4) 
[20201104 12:01:15.737 CET] [default] [debug]: QVariant(int, 4) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QBitArray, QBitArray(1011 0111 0)) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(int, 28) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "FIBARO System") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "FGS221 Double Relay Switch 2x1.5kW") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "Routing Slave") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(int, 4) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "Binary Switch") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(int, 16) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "Binary Power Switch") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(int, 1) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "Unknown Type (0x0000)") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(int, 0) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(int, 0) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "Central Controller") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(int, 0) 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "Z-Wave+ node") 
[20201104 12:01:15.738 CET] [default] [debug]: QVariant(QString, "Complete") 
[20201104 12:01:15.739 CET] [default] [debug]: QVariant(QString, "0x010f") 
[20201104 12:01:15.739 CET] [default] [debug]: QVariant(QString, "0x0200") 
[20201104 12:01:15.739 CET] [default] [debug]: QVariant(QString, "0x0109") 
[20201104 12:01:15.739 CET] [default] [debug]: QVariant(uint, 40000) 
[20201104 12:01:15.739 CET] [default] [debug]: QVariant(int, 4) 
[20201104 12:01:15.739 CET] [default] [debug]: QVariant(int, 3) 
[20201104 12:01:15.739 CET] [default] [debug]: QVariant(QBitArray, QBitArray(1011 0011 0)) 
[20201104 12:01:15.763 CET] [ozw.manager] [debug]: ProductPic Path:  "/data/ozw/config/images/aeotec/zw090.png" 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch running 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch() Finished 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch running 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch() Finished 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch running 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch() Finished 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch running 
[20201104 12:01:15.868 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch() Finished 
[20201104 12:01:15.869 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch running 
[20201104 12:01:15.869 CET] [ozw.logging] [debug]: QTOZWLog_Internal::sendSyncLogsBatch() Finished 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 1) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 2) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 3) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 4) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 5) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 7) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 8) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 9) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 10) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 11) 
[20201104 12:01:20.311 CET] [default] [debug]: QVariant(int, 12) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 13) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 14) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 15) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 16) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 17) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 18) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 19) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 20) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 21) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 22) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 23) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 24) 
[20201104 12:01:20.312 CET] [default] [debug]: QVariant(int, 26) 
[20201104 12:01:20.313 CET] [default] [debug]: QVariant(int, 28)

This is the event list for pressing a switch on (not working though):

What is this? Where to start troubleshooting?

firstof9 · November 4, 2020, 1:56pm

Start a new thread, and you’ll need to post your ozw log.

sender · November 4, 2020, 2:19pm

Where can I find that?