UPDATED! SolarEdge Modbus full setup guide with Energy Dashboard integration for Installations with Battery connected

I’m having some issues trying to enable MODBUS TCP on the inverter.

It worked very easily at my last house as I was able to enable MODBUS TCP via the setup web interface (http://172.16.0.1) using the P switch and it started reporting to HA straight away.

My new house I have just had two inverters (leader /follower on RS485-2) and consumption meter installed (MODBUS multi device on RS485-1 - Export+Import)

I can ping the inverter over the wifi connection, but when I enable the MODBUS TCP port I am unable to open a socket to 1502 or 502 via telnet and thus HA cannot connect either.

I have tried a lot of combinations I have read about switching port numbers and switching to non Solaredge logging, but nothing will let me access the MODBUS port.

For a few days after install I did have access through port 80 and was able to setup the SolarEdge local integration, but that port is no longer available, which seems common.

I’m wondering if having both RS485 interfaces is an issue, or wifi? My last inverter did allow access over wifi.

Any ideas?