I have a 4-button switch connected to HA via zigbee: Tuya TS0044 control via MQTT | Zigbee2MQTT Tuya TS0044 control via MQTT | Zigbee2MQTT Everything worked fine for 2 years and recently stopped working. I removed the switch from zigbee2mqtt, paired it again. In Zigbee2mqtt everything works fine,…

Assuming you upgraded your Z2M to 2.*: [image] Zigbee2MQTT 2.0.0 breaking changes · Koenkk/zigbee2mqtt · Discussion #24198 This discussion contains a list of breaking changes for Zigbee2MQTT 2.0.0. TipMost of the breaking changes are about removing legacy features that have been depreca…

My Zigbee2MQTT version is 2.1.1-1 and I understand issue about actions but shouldn’t it show device state and entities Switch-4-pos? { “battery”: 100,* “last_seen”: “2025-02-16T21:14:03.781Z”,* “linkquality”: 255,* “voltage”: 3000* }

[image] belamy: I removed the switch from zigbee2mqtt, paired it again. When you did that, did you also update the name and make sure to select “Update Home Assistant entities” (or something similar). If you didn’t, HA is still referring to the switch by the default random bunch of numbers.

You want to turn on “Home Assistant legacy action sensors” inside Zigbee2MQTT, the new events are really bad, one of the admins even opened a WTF thread about them.

Cyberbeni, would you like to point us to this issue? While new triggers work ok to me, I’m curious what might be the cons of this approach.

[image] WTH are event entities not triggered a second time when using the attribute `event_type` in a state trigger? Month of "What the heck?!" The new event entities are meant to replace old school event triggers (and Z2M sensor’s). The problem is, the features are not 1…

That was a problem. I had disabled “legacy” and “experimental” options at Zigbee2MQTT->Settinges->Home Assistant Integrations :+1: Thanks

Yes, I always remember to have “Update Home Assistant entities” enabled when rename devices. It was different problem caused by new method of maintaining buttons event at new version od Zigbee2MQTT (since 2.0). Cyberbeni and my replies resolve this problem.

Thank you. It seems I don’t experience those issues because I solely use the NodeRed for automations.

Why doesn't HA show the device connected via zigbee and Zigbee2MQTT?

Configuration

Cyberbeni (Benedek Kozma) February 18, 2025, 7:48am 8

There is also a possibility for people to set it up in a way that triggers it after a HA restart.