Working config for Blitzwolf BW-SHP7!

ESPHome
21

I have 7 Blitzwolf SHP7, each of them converted to ESPHome via TuyaConvert.

Without adding the GPIO15_irq, the devices operate at higher temperatures, especially from one side of the switch. Also if you turn on the two sockets at the same time, after some random period of time, (usually between 5 and 10 minutes) the device reboots itself.

After adding the GPIO15_irq to my ESPHome config for the SHP7 switch, I can confirm that the devices seem to be colder than before. And also I have had no more sporadic reboots when the two switches are on.

I would like to thank @Noltari for discovering this.

@fribse I think that the GPIO15_irq should be added to the default config for this device in https://www.esphome-devices.com/devices/BlitzWolf-BW-SHP7/

1 Like
22

Yup, didn’t know how to do that, but it got accepted, so it’s there now :slight_smile:

1 Like
23

Hi put this configuration device its work hell but powermonitoring dont work all values is 0 .
Need Calibration? how resolve this ?
thanks

24

It shouldn’t need calibration, or at least it should show some weird values, but not 0. Is it a SHP7? Or is it something else but similar?