Will post a link to rails as soon as they arrive and i test that they are compatible
The device is supported with the next release of home assistant.
1 Like
Just testing UDP traffic isn’t sufficient. It’s multicast traffic which must be possible.
Hi All. There seems to be a large majority (myself included) who believe it will be best to close this thread and start supporting Xiaomi issues with a thread per issue.
E.g. a new thread to discuss water sensor support, a new thread to discuss phantom motion detection etc etc.
How can this be achieved @admins?
1 Like
To discuss ghost issues please take this direction: Xiaomi body sensor gateway maybe wrong motion detection
If you have trouble to discover your new gateway take a look here: Xiaomi gateway not discovered
The support for the new water leak sensor will be released with home assistant 0.53. The feature is already merged and can be tested on the development branch.
Please reference additional important topics!
1 Like
Totally agree… There are nearly 3,000 posts and a lot of them about testing and the beta phase.
I think it’s easier to follow up with questions in separate threads!
Same here
Left :ko / right :ok / both :ok 
I did more or less the same thing did an over eager firmware update and my double wireless aqara wall switch arrived in the post the next day.
I can see the switch in hass but LEFT, RIGHT, BOTH all do not register. At least I only got the one to trial. If I didn’t already have a bunch of the older round wifi buttons I’d think about ordering a second gateway.
Yeah it’s frustrating. Hopefully it’ll be fixed in future firmware
Hi,
I have a Synology with HA dockers and in my case works well.
I had problem time ago also with synology and the problem can be in 2 places:
1.- Docker configuration. Did you check network option in you docker for HA?
2.- As people mentioned there are some routers that block some traffic, if it possible try to use HA with other router.
the new is
attributes[“load_power”
?
Claudio, it’s attributes.load_power
2 Likes
Hi there excelent work you guys did here. My whit bulb just connect googd but the colored one don´t connect is there any config I have to do?
What’s the product name of the device you are talking about?
I am using the latest HA official version. The temperature and light sensor not update frequently, i like it update about 1 per minute . Anyone know how to fix the problem?
why you need temperature updates every one minute?
For battery powered devices that might be excessive battery consuming times
But the sensor is useless if it not “sens” current value, like temperature and light. Because i want to use it for automation. 1 minute is just an example. The light sensor from the gateway some time delay for about 1 hour and temperature delay for 60 minutes
In the official document it says that the lux readings are done hourly or when a motion is detected. I am talking about the new combined light and motion detectors. So if you want to make an automation relying on motion detection and the luminance as a condition only, the sensors are usable. But if you want to use the luminance as a trigger they won’t be usable. Use the gateway’s light sensor in that case. It is much much more frequent (hours vs seconds).
I am using the gateway’s light sensor by the way, it seems much more reliable.