PhUser
1
Hello,
I have several sensors to measure soil moisture.
With a sensor, however, no entities are read out.
sensor that works
Sensor that doesn’t work
However, I can query the data under Manage Zigbee device. Only as an entity these are not created.
Why is that?
Hedda
(Hedda)
2
Try re-pair it as when similar devices don’t work the same it usually means negotiations did not complete.
See → https://www.home-assistant.io/integrations/zha#best-practices-to-avoid-pairingconnection-difficulties
Also read and follow this as it normally have a huge impact on wheather or not pairing will be successfull or nt or not → Guide for Zigbee interference avoidance and network range/coverage optimization
PhUser
3
Hello, thank you.
I’ve tried different scenarios now.
Pairing at the planned location.
Pairing near the ZigBee Stick.
Replaced the batteries.
The frequency of the WiFi is far away from the ZigBee frequency.
The ZigBee stick is connected to the server with a 2m USB cable.
It always stays there. The device is found. (Very fast near the Zigbee Stick)
But the entities are always missing.
lipas
(Przemysław)
4
Did You manage to receive the data?