I managed to connect the Niko friends of Hue (equivalent to EnOcean PTM 215Z) to a CC2652 usb dongle.
The pairing procedure for it was different than to pair with the Philips Hue and I was confused that it was not working first. But following the Zigbee2MQTT guide to pair the EnOcean worked like a charm and I have it in my device list. I can throw my Hue bridge, finally.
The Greenpower devices are really nice. I also started with Philips Hue, than changed to i Pi4 with deconz stick and now i am using a nuc with a sonoff P stick. I changed from the deconz stick because i always lost my window contact devices and had no idea what to do. Now with the sonoff stick that works great. But now I have issues with the Gira FoH Greenpower swiches, because they are reacting very different. with the preinstalled firmware of the sonoff stick from 2021 the network was reacring very fast but after some hours it get very slow, like 2-3 seconds after the push. Only with unpluging the stick from the power supply and restart zigbee2mqtt the reaction was getting fast again. So i decided to do a firmwareupdate for the sonof stick.
Now i have updated to CC1352P2_CC2652P_launchpad_coordinator_20250321.hex. But now the swiches are always very delayd. Has anyone the same experiences? The rest is reacting fine. Only the swiches are very slow. I have a Zigbee network of 88 devices and nearly the half of it are routers.
Zigbee2MQTT version
2.3.0 commit: unknown
Coordinator type
ZStack3x0
Coordinator revision
20250321
Frontend version
0.9.10
zigbee-herdsman-converters version
23.36.0
zigbee-herdsman version
4.0.0
Stats
Total 88
By device type
Router: 40
End devices: 35
GreenPower: 13
