they are part of the device_tracker
see link at the bottom of the page you referenced
1 Like
Thanks, nice to know it’s not just happening to me. I guess this is ‘v1’ of the new sidebar, hopefully ‘v2’ will work out a few of these issues 
I have the exact same log error using the enphase integration as well. Was looking forward to mapping out individual inverter numbers…
installed hassio on pi4, but getting “… add-on is not available on your system.” for all add-ons? Any ideas?
Ditto.
I don’t see why there has to be a tradeoff. You want icons? Then you gotta lose the ability to hide the menu!
Eh?
I’m not fond of the workaround which is install and configure a completely different menu.
Car Customer: I don’t like this new triangular steering wheel. I prefer the round one.
Car Dealer: It’s the latest thing. It’s better. Trust me.
Car Customer: Can I get a round one?
Car Dealer: Sure. Just replace it yourself.
5 Likes
Yep you are not alone:
Same here. Got similar error, but there are some differences.
Also I’ve tried to:
Any suggestion!?
Having similar issues on my xiaomi vacuum cleaner here too, with the same ImportError about OPENSSL_1_1_1.
xiaomi_miio: Error on device update!
...
ImportError: /usr/lib/arm-linux-gnueabihf/libssl.so.1.1: version `OPENSSL_1_1_1' not found (required by /srv/homeassistant/lib/python3.7/site-packages/cryptography/hazmat/bindings/_openssl.abi3.so)
I’ve lost the ability to use ‘boost’ for my Hive 
I can set the device to on (on), off (off), and eco (which seems to map to ‘schedule’ on the Hive) - any ideas @rendili?
nmap_tracker issues with 0.96
I will comment some options and see if it works.
Anyone else got issues trying to update?
My hassio log spits out something along the lines:
19-07-18 11:49:41 INFO (SyncWorker_9) [hassio.docker.interface] Update image homeassistant/qemux86-64-homeassistant:0.95.4 to homeassistant/qemux86-64-homeassistant:0.96.0
19-07-18 11:49:41 INFO (SyncWorker_9) [hassio.docker.interface] Pull image homeassistant/qemux86-64-homeassistant tag 0.96.0.
19-07-18 11:50:33 ERROR (SyncWorker_9) [hassio.docker.interface] Can't install homeassistant/qemux86-64-homeassistant:0.96.0 -> 404 Client Error: Not Found ("no such image: homeassistant/qemux86-64-homeassistant:0.96.0: No such image: homeassistant/qemux86-64-homeassistant:0.96.0").
19-07-18 11:50:33 WARNING (MainThread) [hassio.homeassistant] Update Home Assistant image fails
Reading the “404 - not found” error I thought the image might be taken down, so I tried pulling the image locally (docker pull homeassistant/qemux86-64-homeassistant:0.96.0) but this works just fine.
Unfortunately we had to move the hotwater device from climate to water_heater, and at the moment water_heater does not support any boost functionality and does not have a an auto mode, so for now in the short term we have had to map this to eco.
ASUSWRT stopped working.
Error during setup of component asuswrt
13:51 components/asuswrt/init.py (ERROR)
Thu Jul 18 2019 13:51:35 GMT+0200 (centraleuropeisk sommartid)
Error during setup of component asuswrt
Traceback (most recent call last):
File “/srv/homeassistant/lib/python3.7/site-packages/homeassistant/setup.py”, line 153, in _async_setup_component
hass, processed_config)
File “/srv/homeassistant/lib/python3.7/site-packages/homeassistant/components/asuswrt/init.py”, line 45, in async_setup
from aioasuswrt.asuswrt import AsusWrt
File “/srv/homeassistant/lib/python3.7/site-packages/aioasuswrt/asuswrt.py”, line 9, in
from aioasuswrt.connection import SshConnection, TelnetConnection
File “/srv/homeassistant/lib/python3.7/site-packages/aioasuswrt/connection.py”, line 6, in
import asyncssh
File “/srv/homeassistant/lib/python3.7/site-packages/asyncssh/init.py”, line 31, in
from .agent import SSHAgentClient, SSHAgentKeyPair, connect_agent
File “/srv/homeassistant/lib/python3.7/site-packages/asyncssh/agent.py”, line 35, in
from .public_key import SSHKeyPair, load_default_keypairs
File “/srv/homeassistant/lib/python3.7/site-packages/asyncssh/public_key.py”, line 43, in
from .encryption import get_encryption_params, get_encryption
File “/srv/homeassistant/lib/python3.7/site-packages/asyncssh/encryption.py”, line 23, in
from .crypto import BasicCipher, GCMCipher, ChachaCipher, get_cipher_params
File “/srv/homeassistant/lib/python3.7/site-packages/asyncssh/crypto/init.py”, line 27, in
from .ec import ECDSAPrivateKey, ECDSAPublicKey, ECDH
File “/srv/homeassistant/lib/python3.7/site-packages/asyncssh/crypto/ec.py”, line 24, in
from cryptography.hazmat.backends.openssl import backend
File “/srv/homeassistant/lib/python3.7/site-packages/cryptography/hazmat/backends/openssl/init.py”, line 7, in
from cryptography.hazmat.backends.openssl.backend import backend
File “/srv/homeassistant/lib/python3.7/site-packages/cryptography/hazmat/backends/openssl/backend.py”, line 74, in
from cryptography.hazmat.bindings.openssl import binding
File “/srv/homeassistant/lib/python3.7/site-packages/cryptography/hazmat/bindings/openssl/binding.py”, line 15, in
from cryptography.hazmat.bindings._openssl import ffi, lib
ImportError: /usr/lib/arm-linux-gnueabihf/libssl.so.1.1: version `OPENSSL_1_1_1’ not found (required by /srv/homeassistant/lib/python3.7/site-packages/cryptography/hazmat/bindings/_openssl.abi3.so)
have you find a solution?
still looking for it, since I get error during “Check Home Assistant configuration”
Failed config
General Errors:
- Platform not found: device_tracker.nmap_tracker
Thanks
2 Likes
I’ve never installed or updated numpy, is this something I should attempt to fix or is this something the developers of the IQVIA platform need to address?
IQVIA Platform Error
2019-07-18 06:06:12 ERROR (MainThread) [homeassistant.setup] Unable to prepare setup for platform iqvia.sensor: Platform not found (
IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!
Importing the multiarray numpy extension module failed. Most
likely you are trying to import a failed build of numpy.
Here is how to proceed:
- If you’re working with a numpy git repository, try
git clean -xdf
(removes all files not under version control) and rebuild numpy. - If you are simply trying to use the numpy version that you have installed:
your installation is broken - please reinstall numpy. - If you have already reinstalled and that did not fix the problem, then:
-
Check that you are using the Python you expect (you’re using /srv/homeassistant/bin/python),
and that you have no directories in your PATH or PYTHONPATH that can
interfere with the Python and numpy versions you’re trying to use. -
If (1) looks fine, you can open a new issue at
https://github.com/numpy/numpy/issues. Please include details on:- how you installed Python
- how you installed numpy
- your operating system
- whether or not you have multiple versions of Python installed
- if you built from source, your compiler versions and ideally a build log
Note: this error has many possible causes, so please don’t comment on
an existing issue about this - open a new one instead.
-
Original error was: libf77blas.so.3: cannot open shared object file: No such file or directory
).
Replying to my own problem here.
In case anyone gets this issue, check your disk usage %, after running docker pull homeassistant/qemux86-64-homeassistant:0.96.0 ssh’d onto hassio it told me there is no disk space left.
Sadly the error output from hassio is a bit misleading here.
eq3btsmart error also in 0.96…
2019-07-18 13:56:17 ERROR (MainThread) [homeassistant.components.climate] Error while setting up platform eq3btsmart
Traceback (most recent call last):
File "/srv/homeassistant/lib/python3.7/site-packages/homeassistant/helpers/entity_platform.py", line 126, in _async_setup_platform
SLOW_SETUP_MAX_WAIT)
File "/usr/local/lib/python3.7/asyncio/tasks.py", line 416, in wait_for
return fut.result()
File "/usr/local/lib/python3.7/concurrent/futures/thread.py", line 57, in run
result = self.fn(*self.args, **self.kwargs)
File "/srv/homeassistant/lib/python3.7/site-packages/homeassistant/components/eq3btsmart/climate.py", line 69, in setup_platform
devices.append(EQ3BTSmartThermostat(mac, name), True)
TypeError: append() takes exactly one argument (2 given)
In config:
climate:
- platform: eq3btsmart
devices:
salotto:
mac: !secret salotto_mac
I’m also having the same issue. chrome seems to be doing it as well but only randomly
All my Netatmo sensors only shows “unknown”. Does it work for anyone else?
also having same same issue, also running iPad OS 13 Beta