Add Fibaro Roller Shutter 3 node to Zwave JS

Configuration Z-Wave
, ,
7

Hi.

I’m new on Hass.
Firstly, i tried with ZWave (deprecated) but it does not works. So, i’m trying with ZwaveJS.
I created a topic : Fibaro Rollet Shutter 3 - Calibration does not work

Fibaro Roller Shutter 3 (FGR23 v5.1) is well recognized on Hass with ZWaveJS. (note: I’ve tried razor620’s solution a dozen times to make it work)
But, Node status id : dead
Node Ready: No

fibaro id
fibaro id1245×531 29.6 KB

If i click on the switch, Node status does not changed.
I can not add automatisation or script : “No automation is available for this device.”

What do I need to do to control my roller shutter from hass ?
This module will drive me crazy :face_with_symbols_over_mouth:

EDIT: Add logs

20:51:27.317 CNTRLR   [Node 003] The node is now alive.
20:51:27.319 CNTRLR   [Node 003] Beginning interview - last completed stage: NodeInfo
20:51:27.324 CNTRLR   [Node 003] ManufacturerSpecificCC: doing a partial interview...
20:51:27.331 CNTRLR   [Node 003] VersionCC: doing a complete interview...
20:51:27.331 CNTRLR » [Node 003] querying node versions...
20:51:27.355 CNTRLR   Failed to execute controller command after 1/3 attempts. Scheduling next try i
                      n 100 ms.
20:51:34.424 CNTRLR « [Node 003] received response for node versions:
                        library type:      Enhanced Slave (0x03)
                        protocol version:  6.2
                        firmware versions: 5.1, 5.1
                        hardware version:  3
20:51:34.424 CNTRLR » [Node 003] querying CC versions...
20:51:34.425 CNTRLR   [Node 003]   skipping query for Application Status (0x22) because max implemen
                      ted version is 0
20:51:34.426 CNTRLR » [Node 003]   querying the CC version for Multilevel Switch...
20:51:41.449 CNTRLR   [Node 003] did not respond after 1/3 attempts. Scheduling next try in 500 ms.
20:51:46.992 CNTRLR   [Node 003] did not respond after 2/3 attempts. Scheduling next try in 500 ms.
20:51:52.534 CNTRLR   [Node 003] Node 3 did not respond after 3 attempts, it is presumed dead
20:51:52.537 CNTRLR   [Node 003] The node is now dead.
20:51:52.544 CNTRLR   [Node 003] Interview attempt (9/5) failed, node is dead.

Configurations

  • Raspberry Pi 4B 4Go
  • Home Assistant 2021.2.3 installed on SSD
  • Aeotec Z-Stick Gen5+
    zwavejs version