AEOTEC Z-STICK can't configoration

I purchased an Aeotec Z-Stick Gen5, Z-Wave Plus USB and home assistant I connect and see that it is in the path: /dev/ttyACM0 but the system does not rise after the restart I added these settings only:
zwave:
And then I tried to add:
zwave:
usb_path: /dev/ttyACM0

And the system does not work
What to do?

i have hassbian and Home Assistant 0.72.1
raspberry pi 3 model b+

Home Assistant as a whole won’t start or your not seeing anything on the zwave side?

Are you familiar with the states tab? Scroll down to the bottom, you should see your zwave stick as an entity.

Is there anything in the log about an error?