Another zigbee2mqtt help thread

Sonoff Dongle E

flashed the firmware to:

port: >-
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_5477c355b439ef11b6d255f454516304-if00-port0
adapter: ember

[2024-12-11 09:22:03] info: zh:ember:uart:ash: ======== ASH starting ========
[2024-12-11 09:22:05] error: z2m: Error while starting zigbee-herdsman
[2024-12-11 09:22:05] error: z2m: Failed to start zigbee
[2024-12-11 09:22:05] error: z2m: Check Zigbee2MQTT fails to start | Zigbee2MQTT for possible solutions
[2024-12-11 09:22:05] error: z2m: Exiting…
[2024-12-11 09:22:05] error: z2m: Error: Failed to start EZSP layer with status=HOST_FATAL_ERROR.

this is way harder than it should be

got it working, by trying different firmware flashes.

between 7.4.5 and 7.4.4 and the two different baud rate versions. Can’t recall which worked. Not sure if there’s a way to see now which one I flashed without unplugging it from my server and connecting it to the Win PC