Woow it is just i’m searching my inverter is min-6000tl-xh, then every 2 sec you have real information in HA and so you can configure routines with the data gotten
Did you need a special connector to be able to connect to the RS485 pins 3 and 4 of the invertor?
The connector for that was included with my Growatt inverter (actually two of them)
So does anyone know if Home Assistant has changed something.
I used to have this sensor i made myself, it worked fine, but now it just says that it is not available.
sensor:
- platform: template
sensors:
delta_t_solar_heating:
friendly_name: Surplus solar
unit_of_measurement: KW
value_template: >-
{{ ( states('sensor.oocmaXXXXX_all_pv_wattage') | float |
round(1)) - ( states('sensor.oocmaXXXXX_load_consumption') | float
| round(1))}}
(I changed the oocma number, dont know if it is unique)
Both of the sensors are available, but my “surplus solar” sensor is suddenly not available anymore
Hello, I have a Growatt 3 phase invertor that works great with HA.
I have installed a Growatt 3 phase smart meter and while I’m adding the Growatt integration in HA seems that the meter is detected (two devices are visible in the list). For it all the values are 0. Is this a known issue? I’m using the HA 2022.12.5
Thanks!
The invertor is adding the proper values:
Hi @alexdordea
Welcome to the party!
Can you do me a favour and send me a screen-grab from the Growatt Website when you’re logged in?
I need to see what ‘device type’ your system is registered as, I need to see this:
Assuming there are multiple items in the device type dropdown I need to know what they all are.
It’s highly likely that we just don’t yet have support for one of the items on the list. I have a running forum topic over here: Growatt Integration - Prioritised List of Features for Implementation/Fixing which lists all of the open tickets and the priority order that I’m working on them in.
If you give me the info from above then I’ll tell you what ticket to keep an eye on.
1 Like
Thanks for the feedback!
The invertor is: MID 20KTL3-X1
The smart meter: EASTRON SDM630-Modbus V3
Please find the items in my drop down:
Thanks!
Ahh yes, we don’t yet have support for the MAX/MID type it’s the next thing on my list, I suggest following this ticket here: Growatt server integration partially working · Issue #51660 · home-assistant/core · GitHub
But my issue is related? I mean this is the invertor and the values for the invertor works fine. The issue is with the smart meter.
After adding Growatt in my HA I do have two devices detected:
For Growatt meter I don’t have any value populated:
For the invertor everything works fine:
Already subscribed to the notifications, thank you 
Yes, it’s 100% the same issue, I remember investigating it the first time it happened. The reason it returns zeros for all the values is because the integration incorrectly things it’s a different type of system and then returns all the wrong value for which it doesn’t get any updates.
1 Like
Cool, thank you for your help! I’ll check the thread with the updates 
No problem, I can’t promise it’ll get resolved this side of Christmas, I’ve got a lot of commitments etc over the festive period. But keep an eye on this post: Growatt Integration - Prioritised List of Features for Implementation/Fixing as I updated it as/when I’m working on things, so you’ll know when I’m picking the work up again.
1 Like
Thank you! Let me know if you need credentials from my install to help with the dev/testing
Hello fellow growatters,
I know this integration occasionally has issues as growatt servers go offline every now and then.
This time my integration is broken for over weeks and a half now, with no data whatsoever.
I am able to log into both from web browser
‘https://server.growatt.com/’
‘https://server-api.growatt.com/’
My homeassistant instance
Home Assistant 2022.12.8
Supervisor 2022.12.1
Operating System 9.4
ERROR LOG
Logger: homeassistant.components.sensor
Source: components/growatt_server/sensor.py:43
Integration: Sensor (documentation, issues)
First occurred: 10:52:33 AM (1 occurrences)
Last logged: 10:52:33 AM
Error while setting up growatt_server platform for sensor
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 281, in _async_setup_platform
await asyncio.shield(task)
File "/usr/src/homeassistant/homeassistant/components/growatt_server/sensor.py", line 91, in async_setup_entry
devices, plant_id = await hass.async_add_executor_job(get_device_list, api, config)
File "/usr/local/lib/python3.10/concurrent/futures/thread.py", line 58, in run
result = self.fn(*self.args, **self.kwargs)
File "/usr/src/homeassistant/homeassistant/components/growatt_server/sensor.py", line 43, in get_device_list
login_response = api.login(config[CONF_USERNAME], config[CONF_PASSWORD])
File "/usr/local/lib/python3.10/site-packages/growattServer/__init__.py", line 132, in login
data = json.loads(response.content.decode('utf-8'))['back']
File "/usr/local/lib/python3.10/json/__init__.py", line 346, in loads
return _default_decoder.decode(s)
File "/usr/local/lib/python3.10/json/decoder.py", line 337, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/local/lib/python3.10/json/decoder.py", line 355, in raw_decode
raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
I have tried deleting it, but when I try to add integration at the screen where I have to enter credentials it just says ‘Error’ …yes the username and password are correct, I even created a separate user/pass for integration, still no joy.
Any pointers on what is wrong specifically with my setup/.
Hi, there’s currently an issue with the integration, you can find the updates here: Error while setting up growatt_server platform for sensor · Issue #84600 · home-assistant/core · GitHub
I had the same problem, so my Xmas project has been to build a Raspberry Pi Zero W based interface between my SPH3000 and Home Assistant using MQTT and a cheap RS485 serial to USB dongle from Amazon.
I now have this code in testing and am enjoying 60 second updates flawlessly from my PV and battery.
My project doesn’t interfere with the Growatt WiFi dongle, and can be adapted to other inverters that use Modbus RTU (definitely other Growatts).
I’ll publish the code when I’ve written a readme doc if anyone’s interested.
David
3 Likes
looking forward to this alternate solution
Awesome! I have been searching for a way to avoid the Growatt API solution, as the data is available just a few meters away. Looking forward to see your solution.
Ok, here goes: I’ve published what I have built. I’ve used a Raspberry Pi Zero W with an RS485-USB adapter connected to the RS485 spare port on the bottom of my Growatt SPH3000. On the Raspberry Pi I run Raspberry Pi OS, Node.js and code that I have written. The code polls the Growatt inverter and publishes via MQTT all the values I want. These values are used in Home Assistant to populate a Lovelace dashboard and to trigger automations. In the future, I will update the code to allow Home Assistant to publish commands via MQTT to my code and to control the inverter (e.g. to change battery charging time etc.).
The code and instructions can be found at: GitHub - 666djb/solarpi: Solar inverter to MQTT bridge for inverter values
This works for me with a Growatt SPH3000, Raspberry Pi Zero W and an RS485-USB adapter bought from Amazon. It should work with other SPH inverter models and can be adapted for others still. The code is not a Home Assistant Add-on or Integration, it runs separately on another Pi.
David
2 Likes