Hey guys,
Not big of a problem, and Im sure its something I did on my end, but latley the appdaemon logs dont show the same info as they used to do.
A while ago I liked to just look at the logs as they showed me my devices being updated with speceific data for that device.
For example, I use an NSpanel with custom Tasmota firmware, and enjoyed seeing the data being send in the appdaemon logs via mqtt.
Lately my logs just show:
Currently my log level is Trace, but it just shows my example shown above.
2024-06-12 00:05:04.619897 INFO exterior_periodic_lights: Previous message repeated 2 times
2024-06-12 00:05:04.602563 INFO AppDaemon: Previous message repeated 1 times
2024-06-12 00:05:00.670459 INFO AppDaemon: Previous message repeated 0 times
2024-06-12 00:04:59.626104 INFO AppDaemon: Previous message repeated 2 times
2024-06-12 00:04:59.624256 INFO exterior_periodic_lights: Previous message repeated 2 times
2024-06-12 00:04:54.620079 INFO exterior_periodic_lights: Previous message repeated 2 times
2024-06-12 00:04:54.602505 INFO AppDaemon: Previous message repeated 1 times
2024-06-12 00:04:53.848640 INFO nspanel-1: Previous message repeated 3 times
2024-06-12 00:04:53.830276 INFO nspanel-1: Previous message repeated 1 times
2024-06-12 00:04:53.825527 INFO nspanel-1: Previous message repeated 1 times
2024-06-12 00:04:53.820745 INFO nspanel-1: Previous message repeated 1 times
2024-06-12 00:04:53.803163 INFO AppDaemon: Previous message repeated 1 times
2024-06-12 00:04:49.620624 INFO exterior_periodic_lights: Previous message repeated 2 times
I tried changing the Log Level settings in the AppDaemon addon, but that just results in even less info being shown.
My Log Level is currently set to Trace, but results in the log shown above.