HI folks,
I tested the program today; I have a silly question: do I have to exit from the Bentel program to see the info? I’m asking because I entered the Bentel program mode to remove the cover
I tried to switch the RX/TX but I see all the time this message:
[18:12:52][V][mdns:086]: Services:
[18:12:52][V][mdns:088]: - _esphomelib, _tcp, 6053
[18:12:52][V][mdns:090]: TXT: version = 2022.1.1
[18:12:52][V][mdns:090]: TXT: mac = 083af2ac0948
[18:12:52][V][mdns:090]: TXT: platform = ESP32
[18:12:52][V][mdns:090]: TXT: board = esp32dev
[18:12:53][V][component:199]: Component <unknown> took a long time for an operation (0.11 s).
[18:12:53][V][component:200]: Components should block for at most 20-30ms.
[18:12:53][V][component:199]: Component <unknown> took a long time for an operation (0.11 s).
[18:12:53][V][component:200]: Components should block for at most 20-30ms.
[18:12:54][V][component:199]: Component <unknown> took a long time for an operation (0.11 s).
[18:12:54][V][component:200]: Components should block for at most 20-30ms.
[18:12:54][V][component:199]: Component <unknown> took a long time for an operation (0.11 s).
[18:12:54][V][component:200]: Components should block for at most 20-30ms.
[18:12:55][V][component:199]: Component <unknown> took a long time for an operation (0.11 s).