Broadlink RM-PRO and A1 sensor

Feature Requests
356

Mine went up to more than 120°C once. Yes, that’s in Celsius and no, we are not dead.

357

I confirmed the issue, I heve a Broadlink A1 multi sensor, all the sensors’ data sometimes extremely high.

358

Same issue here. It happens once or twice a week and just reboot HA and back to normal reading.

359

You are lucky, mine went to 600

360

So is an issue of the component software?

361

Hi Daniel, just wondering if its possible to get S1C to work in HA? Is there any API for that and will you able to help to integrate it, many thanks.

362

No

you should put the ‘sensor’ broadlink.py(this file has 130+ lines, it will shows in the github RAW mode) in the /srv/hass/hass_venv/lib/python3.4/site-packages/components/sensor Directory.

and put the ‘switch’ broadlink.py (this file has 260+ lines) in the /srv/hass/hass_venv/lib/python3.4/site-packages/components/switch

363

Someone have to add support for it to the library we are using first: https://github.com/mjg59/python-broadlink

364

Hi, now that I have broadlink rm pro working great, I have more philosophical questions :yum: :

Broadlink rm learns and plays back commands, so it’s much more than a switch, so it will be great if we can call “broadlink commands” from other components. First thing coming to mind are my RF blinders : they have 3 commands : open/close/stop so it’s not suitable for the switch component (there’s also my generic IR heater with on/off/speed fan1/2/3/heat0/1/2, but it’s obviously taunting me :smiley: ).
Of course, I can use the command_line cover to play codes with a few python scripts. It works great, but integration wise it’a a little off…

So, Did I miss something and is it already possible? If not, do you think it’s a good idea considering home assistant architecture?

Thanks!

365

with recent built the learning command for RF is not working

366

Which version are you using?

367

Not sure, I think 5065

368

Of Homeassistant? You should use the latest version of Broadlink component from the dev version or wait for the next release

369

which is the latest version?
I have HASS 0.35.3

370

That is the latest release, but these fixes https://github.com/home-assistant/home-assistant/pull/5065
will be included in the next release.

371

Replying to save the post and understand if this’ll get support for TC2 Wall Switches. I do have both switches and hub so if there’s need to test anything, I’m available :slight_smile:

372

SO is a hardware issue?

373

still having from Crypto.Cipher import AES
ImportError: No module named ‘Crypto’ error how to solve?

374

It should be fixed in the next release

1 Like
375

Any chance you can provide some sample code how can I configure the Air Quality to be shown as text and not as number? I can’t figure out how to specify the value_template. Thanks!