Cannot find cover current_position for outside roller shades

Hello everyone. I am new to HA and have installed several window shades that are battery powered and controlled via Z-wave from smartwings

Outside

Inside

I started looking into this as I just learned how to create cards where I can control the shades

When I look at the card I noticed that 2 of the outside shades have the up and down arrows in black while the others show them gray for the up. At the time of this capture all the shades were up. The Mud room Curtains were all the way down.

I wanted to check to see what value the 2 shades had that were different so I looked for thir current_position entity but couldn’t find it.

When I check a Curtain for this I can find this

I tried re-interviewing the shade but no other entitles were found. I realize that even though these are made by the same company there maybe some differences in the motors and what they report via Z-wave.

When I click on the entity card, I do get a selector for a percentage

So I suspect that this data is going from the shade to HA but I just cannot seem to find it. So I am just trying to figure out what is happening with this system.

Any help is appreciated.

Steve