Card not displaying entities specified in config

Configuration
1

I am extremely bewildered as to why entities I specify on a card don’t show up in the card. Particularly because they’re all the “winter” entities generated by utility_meter that don’t show up. They don’t show up in the automatic lovelace dashboard either.

Screen Shot 2022-05-21 at 21.40.59
Screen Shot 2022-05-21 at 21.40.592036×1438 346 KB

But they show up in history just fine. (Can’t post another image because I’m a new user I guess, but imagine sensor.daily_dte_import_winter_peak appearing in history graphs properly.)

Is there some way to reset some state somewhere that’ll make em show up?

Here’s the utility_meter config if that’s helpful:

utility_meter:
  hourly_dte_import:
    source: sensor.grid_import
    name: Hourly DTE Import
    cycle: hourly
    delta_values: true
    tariffs:
      - summer_peak
      - winter_peak
      - summer_offpeak
      - winter_offpeak
  daily_dte_import:
    source: sensor.grid_import
    name: Daily DTE Import
    cycle: daily
    delta_values: true
    tariffs:
      - summer_peak
      - winter_peak
      - summer_offpeak
      - winter_offpeak
  monthly_dte_import:
    source: sensor.grid_import
    name: Monthly DTE Import
    cycle: monthly
    delta_values: true
    tariffs:
      - summer_peak
      - winter_peak
      - summer_offpeak
      - winter_offpeak
  daily_dte_export:
    source: sensor.grid_export
    name: Daily DTE Export
    cycle: daily
    delta_values: true
    tariffs:
      - summer_peak
      - winter_peak
      - summer_offpeak
      - winter_offpeak
  monthly_dte_export:
    source: sensor.grid_export
    name: Monthly DTE Export
    cycle: monthly
    delta_values: true
    tariffs:
      - summer_peak
      - winter_peak
      - summer_offpeak
      - winter_offpeak
  hourly_panel_consumption:
    source: sensor.home_energy_meter_gen5_electric_consumption_kwh
    name: Hourly Total Energy Consumption
    cycle: hourly
  daily_panel_consumption:
    source: sensor.home_energy_meter_gen5_electric_consumption_kwh
    name: Daily Total Energy Consumption
    cycle: daily
  monthly_panel_consumption:
    source: sensor.home_energy_meter_gen5_electric_consumption_kwh
    name: Monthly Total Energy Consumption
    cycle: monthly

Thanks!
Brandon

2

Check the state of those entities in Developer Tools > States.

3

well oddly they just kinda gradually showed up over the last few days and seem to be working fine now. I am… confused… but ok I guess /shrug. :joy: