Changing my wifi connection

d7o0omz · December 13, 2018, 10:26am

hello everyone,
I am having troubles changing my wifi network to a new network. can someone tell how to modify my current wifi network after finishing the installation of hass.io

silvrr · December 13, 2018, 1:15pm

github.com

home-assistant/operating-system/blob/dev/Documentation/network.md

# Network

HassOS uses NetworkManager to control the host network.

## Configure network

Only a manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive and imported to the host as described in [Configuration][configuration-usb].

## Configuration examples

You can read the [NetworkManager manual][nm-manual] or find many configuration examples across the internet. Keep in mind that the system is read-only. If you don't want the IP address to change on every boot, you should modify the UUID property to a generic [UUID4][uuid]. Inside the `\CONFIG\network\` directory on the USB drive or SD card, create a file called `my-network` and add the appropriate contents below:

### Default

A preinstalled connection profile is provided by default:

```ini
[connection]
id=my-network
uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add

This file has been truncated. show original