Check state of 433Mhz switch?

Configuration
1

Can I check status of 433Mhz switch?

Because If I restart HA I lost status of devices? Status Is Always off after restart.

2

Hi,

It would help if you shared what switch you’re using.

Which version of HA are you using. Most states are saved after a restart.
Also how do you restart HA?
If you use the systemctl restart home-assistant@[user].service command (replace [user] with your username) then it should remember states.

Alternatively you can set some states at restart with an automation, or you can follow this:

3

Hi

I am using RFXCOM as transmitter:
http://www.rfxcom.com/epages/78165469.sf/nl_NL/?ObjectPath=/Shops/78165469/Products/14103

Receiving switch socket is:
https://www.bauhaus.hr/voltomat-set-uticnica-na-daljinsko-upravljanje-4-kom.html

I am on 0.62.0 HA version.

After restart of HA switch is always off?

4

I have the same transceiver, and use a combination of controlled switches.
How do you start / stop / restart HA?
I used to start it with hass and stop it with ctrl+c. This would not retain much of the states.
I now start / stop HA as a service which saves each state.
sudo systemctl start [email protected]
Replace start with stop or restart as needed.
See if you can try this way