Configuring a Zooz 4-in-1 Sensor

DonnieNarco · December 25, 2018, 10:23pm

MERRY CHRISTMAS!! So today for Xmas, I got a Zooz 4 in 1 sensor, Model ZSE40. Now, I added it to Hassio and now it is showing a bunch of unknown sensor variables, and then some that say Zooz. Here is a screenshot of it. https://imgur.com/a/17wKsr2 I don’t know how to decide what sensor is what, and do I need all these unknown sensors since this is only a 4-1? Why would it show so many?

I just want it to tell me Light, Temp, Humidity, and Motion…simple, I’m sure, but I can’t quite figure it out. Any help community?? Thanks so much!
And to add to that, I found this guide, but it really is Greek to me…I dont know back end config very much, I try to do most through GUI but I can play around with Yaml if need be.
https://community.home-assistant.io/t/zooz-4-in-1-sensor/14338/15

To add a third part to my above post…This is the descriptions of each of the sensors, from left to right: https://imgur.com/a/dNTkcBn

DonnieNarco · December 26, 2018, 4:49am

Nevermind, I seem to have figured it out. Please delete, Mods.

ptdalen · December 26, 2018, 5:08am

As you get further along. this may come in handy. i use this for my zooz 4 in 1

github.com

ptdalen/home-assistant/blob/master/packages/attic_motion_sensor.yaml

binary_sensor:
  - platform: template
    sensors:
      motion_sensor_attic_motion:
        value_template: "{{ is_state('sensor.motion_sensor_attic_burglar', '8') }}"
        friendly_name: "Motion Sensor (Attic)"
        device_class: motion
        entity_id:  sensor.motion_sensor_attic_burglar

      motion_sensor_attic_tamper:
        value_template: "{{ is_state('sensor.motion_sensor_attic_burglar', '3') }}"
        friendly_name: "Attic Multisensor Tamper"
        device_class: safety
        entity_id:  sensor.motion_sensor_attic_burglar

Use some, all, or none of this in your configuration. Of course name update the yaml for your entities