Configuring ESP32 CAM in Home Assistant

[VijayS (Vijay Sharma)]

I havent done it yet - it is on my todo list but a person here commented that he has done it:
Pl follow his instructions here:

ESP32 Cam - working!

Guys, the ESP32 cam does work with MotionEye and as standalone IP cam. I tested it. There are different codes to program it. If you flash it through ESPHome i.e. inside Home Assistant, there will be no IP access, it will just work in picture card in HA. If you flash it through Arduino default sketch, it will work as IP cam but not working with MotionEye. If you follow instructions on following link, it will work as IP cam and can also work with MotionEye inside HA. Few points to note. Cam resolu…