Controlling RGB LED via ESPHome om ESP32 mini D1


I want to use a ESP32 Mini S1 to control my RGBledstrip, via ESPHome.

I read this linkl: Controlling RGB LED with Home Assistant and ESPHOME - #2 by tom_l
… and is confused.
It rhas Pin: D5. D6 and D7 in the configuration file, but I only connect one vire (signal) on the led-stril… How do this combine?

That topic is about controlling an RGB LED (individual red green and blue), not addressable LED strips. For that you would be far better off using WLED.