Sjefske
(Stefan)
July 5, 2021, 1:11pm
1
I don’t where to place this question and i cannot find any place where to find the solution i’m looking for.
Here we go , I want my wall mounted tablet to go to the default lovelace screen when timer is finished.
Example, when tablet is not used ( not touched ) for 5 minutes it will go automatically back to the defult lovelace home screen
hope someone can help me
tom_l
July 5, 2021, 2:48pm
2
I was thinking browser mod:
But it does not have a sensor to indicate if the device has been used (touched) recently.
Neither does fully Kiosk from my brief reading:
First of all, I know a lot of people have been using the Fully Kiosk Browser on Android for displaying HA, or Floorplan, which works great (I use it myself). But I haven’t come across a write up describing what else you can do with Fully, so I thought I’d share that here.
So, besides installing Fully on an Android device, setting the start URL to your HA URL, and putting it in kiosk mode, it also has a plethora of sensors, and even switches you can control from HA.
The Fully browser is also ca…
Unless your tablet has a motion sensor.
Sjefske
(Stefan)
July 5, 2021, 3:13pm
3
thx,
I also tried something with browser mod but couldn’t get it working properly.
outcome is that i automatically push the screen every 30 to the default screen but when using it at that time, its frustrating the screen where you were is gone.
fully kiosk has motions sensor based on the camere but the screen is faced into the living area, where it sees “lots” of motion.
Sjefske
(Stefan)
July 12, 2021, 9:20am
4
OK i got a manageable solution ( using fully kiosk )
underneath settings you have the option : Web Auto Reload
Add /lovelace/default_view behind your start URL
Auto reload on idle - 5 minutes
Skip auto reload if showing the start URL
This work good enough for me, the only downside is that it is a “reload” so you will see the HASS icon with the loading image for a few seconds
hope someone else can use this
Have it setup with Fully Kiosk and the sensor with MQTT