JerryM
(JerryM)
December 30, 2024, 12:06am
4
Assuming you have a proper ultrasonic device measuring correctly and the correct pipe material for the device …
Δt=t downstream−t upstream
Or if you have just a water meter installed and only worried about the pipe at night or during times no water is being used,
if the water meter is climbing with nothing on, there is a leak.
Hi all,
since a long time i was looking for a solution to measure my water consumption.
Because i have an old classical analog water meter i didn’t found an solution.
Last week i found this fancy solution which i really like. It is based on ESP32CAM and the developer has designed the needed housings for 3d-printing as well.
[Bildschirmfoto vom 2022-01-11 13-36-27]
Integration into Homeassistant goes via mqtt.
Have fun.
I’m trying to read the value of my water meter.
I would prefer not to use a solution like Flume.
My meter does not have a spinning metal disc.
[PXL_20220325_122821545]
I thought I would try you the induction method anyway, but without a spinning metal disc I could not get the inductive sensor to trigger:
So I think I have use a camera to recognize the the value displayed by the meter. Like one of these methods:
[How Artificial Intelligence Can Automate Reading Your Water Meter In…
Thanks for the nice response, I have take some pictures for you. You have to ajust it with the big nut, i have let rest on the glass form the meter and adjust half turn back up.
[IMG20230415193432]
[IMG20230415193453]
1 Like