Hi guys, lovely integration that I’ve been having a lot of fun with. I have a few questions that I hope someone may be able to assist me with:
-
In the integration configuration, I have set the boost temperature to 1C and the duration to 30mins. If the heating is boosted via a TRV, it still does it for the Wiser default 2C and 60mins. Is this setting supposed to control this, or only when boosted via HA?
-
I noticed the addition of new entities for window open detection. Is it possible to have these trigger the detection of an open window rather than just controlling the switch to turn the feature on/off? This way we could use an external sensor, as I’ve not had much luck with a TRV detecting open windows.
-
I have created two button on my Lovelace heating dashboard for the Boost All and Cancel All Boost services, but for some reason I get an error when it calls the service (service not found). It only works if I set the button up so that when I press it, it shows ‘more info’ then I press the ‘press’ link. If the button is set to toggle, I get the error. Am I doing something wrong?
-
Lastly - perhaps not related to the integration - anyone that has TRVs, do you notice that it can occasionally keep making small adjustments to the valve position, like every 30 seconds, as though it is stuck in a loop? Eventually they stop, but I would have though the firmware on these valves would minimise the number of times they are actually moving, thus to maximise battery life.
By the way, here is my setup:
Thanks