All, (don’t know if already reported)
I have tried to setup the new energy usage tab and fill it with data from DSMR reader (via MQTT). I can see data coming in, but the graphs for the first hour of every day seems weird (negative while i do not deliver back to the grid.
Can someone explain what’s happening? After the first hour it seems ok for the rest of the day
p.deelen
(Paul)
August 11, 2021, 6:59am
2
Don’t choose for a sensor thats reset its value every day.
Thanks, found the culprit
ivovdgrift
(Ivo van de Grift)
August 29, 2021, 9:59am
5
Hi Sweetpants,
Can you share some more on the sensors and overall configuration you’ve used to get this working?
markisoke
(Mark R.)
August 30, 2021, 2:36pm
6
You have to use the 2 following sensors:
Low tariff: sensor.dsmr_reading_electricity_delivered_1
High tariff: sensor.dsmr_reading_electricity_delivered_2
And for returned electricity:
Low tariff: sensor.dsmr_reading_electricity_returned_1
High tariff: sensor.dsmr_reading_electricity_returned_2
Martinvdm
(Martin)
September 4, 2021, 2:43pm
7
when usingg this sensors it is giving the meter data as the energy total. So now i uses 14000Kwvh, seems not working at all