I contacted to the manufacturer’s representative, and they told, the manufacturer does not support any modification, even the replace the broken part of the motor or electronics.
So they can’t give any documentation or informaction about the electronics.
So if the control elctronics break down i need to replace the entire motor with the new one.
So i remounted the electronic part into the motor and tried a new concept, and it’s working.
I use the Shelly wave shutter like a phisical swith to controling the shutter moving.
Its very simple, and don’t need to dismount any part, just i opened the 4 wire power cord, and connedted the Shelly wave shutter like the operating button.
So the Black wire to the Shelly wave shutter O1 and the Brown wire to O2, (of course the Blue to the N).
The automatic calibration process in the Z-Wave JS UI worked fine, and found the end positions.I think because my Elero shutter was calibrated before (up and down end position) and worked with the own RF remote control.
Of course the RF remote is not working at now, because there is no power in the original electronics until the Shelly switching any direction (O1 or O2).
So i have a really smart shutter.