Energy dashboard - how to get sum of gas and electricity (in kWh)

[bartplessers]

Hello everyone,

I managed to convert my gas consumption from m3 to kWh, see also

P1 meter - how to get gas in kWh

For the record: added following sensor to my config [2022-03-02_15-21-35] template: - sensor: - name: "P1 meter Total Gas kWh" unique_id: "sensor.p1_meter_total_gas_kwh" icon: mdi:gas-cylinder unit_of_measurement: "kWh" device_class: energy state_class: total_increasing state: > {% set gasm3 = states('sensor.p1_meter_total_gas') | float %} {{ (gasm3 * 10.2346) | round(2, default=0) }} and measurements are coming i…

Now I get a good looking dashboard:

but as you can see, the “Home” bubble only seems to display the energy consumption of the grid, not that from gas.

Is there a way how I can show the sum of all energy consumptions in the “Home” bubble?
How?

kind regards,
Bart

[pbranly (Philippe)]

Until now there is not any solution.
There are pending change requests for that but no success from HA development team
There is even a PR !
The more we are to ask, the more we will get it
Phil

[bartplessers]

ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask. ask.

[bartplessers]

PS.
a workaround:
I defined my gas consumption in kWh as “solar energy”
and my gas consumption in m3 as “gas energy”

In the “Home” bubble, you get the sum.

I’m not fully satisfied with this solution: in the energy dashboard they are also superseded, and the scale of gass consumption (1) is much more than electricity (2), so the graphs become hard to read…