I recently switched over to ZHA from deCONZ. Zigbee devices all seem to be working great, however, I noticed my log is riddled with errors like the following:
2020-01-20 16:21:25 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 10 req id frame: 0xd0
2020-01-20 16:21:25 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 12 req id frame: 0xd0
2020-01-20 16:21:26 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 14 req id frame: 0xd0
2020-01-20 16:21:26 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 18 req id frame: 0xd0
2020-01-20 16:21:26 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 22 req id frame: 0xd0
2020-01-20 16:21:28 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 98 req id frame: 0xe9
2020-01-20 16:21:28 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 100 req id frame: 0xe9
2020-01-20 16:21:35 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 8 req id frame: 0xd0
Hi,
I’m getting plenty of those too but don’t have any real issues with zigbee devices or HA itself. Sometimes 2 of my end devices are shown as unavaiIable but those are the ones that are the farthest away. I’m using ZHA with a Conbee II on a Raspbian Buster Python 3.7.3 virtual env.
Cheers
Same here, I’ve been having these logs for a long time now. Everything is working fine though… If anyone has a solution for this I would be super grateful…
2020-01-23 08:29:24 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 27 req id frame: 0xd0
2020-01-23 08:29:34 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 43 req id frame: 0xd0
2020-01-23 08:29:44 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 45 req id frame: 0xd0
2020-01-23 08:29:54 WARNING (MainThread) [zigpy_deconz.zigbee.application] Error while sending 47 req id frame: 0xd0
Same errors ever since I started using ZHA… Also don’t really experience issues expect some connection problems which seem unreleated. Conbee II in LXC-container
Weird that I’ve been having challenges with this today, too. Could be a coincidence. ZHA doesn’t seem to be finding devices for me. Perhaps this message is a red herring though.
It’s no red herring. I see it occur when zigbee devices aren’t actuated by an automation when expected.
Anybody seeing this that isn’t using a conbee on zha?