Silicon Labs EZSP (which I tried) running firmware 6.10.3.0 Build 297. It is on ttyACMO:
ttyACM0
francisp
March 15, 2024, 3:44pm
76
Then you need
adapter: ezsp
You are sure ZHA is not installed ? Because Zigbee2MQTT will not start if it is.
I totally missed that. Removed ZHA and rebooted. The line is there:
adapter: ezsp
I do appreciate the help but it still will not start up:
[10:58:17] INFO: Preparing to start…#unknown )Zigbee2MQTT fails to start | Zigbee2MQTT for possible solutions
francisp
March 15, 2024, 4:04pm
78
Try with
port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20220719084730-if00
adapter: ezsp
Still no good:
[11:14:00] INFO: Preparing to start…#unknown )Zigbee2MQTT fails to start | Zigbee2MQTT for possible solutions
maybe try this one:
I use for the ConBee III stick the following:
port: /dev/ttyUSB0
adapter: deconz
baudrate: 115200
for EZSP try:
port: /dev/ttyUSB0
adapter: ezsp
baudrate: 115200
the note says also: “however note that some EZSP firmware need 57600”
Nope…no dice with the baudrate entry.
francisp
March 16, 2024, 6:20am
82
Flash the latest firmware on your adapter:
You have to plug the dongle in the computer you browse on, and use Chrome or Edge.
michpa
March 16, 2024, 12:44pm
83
Tried many things, but cant get it to work. Advise and suggestion are much appreciated. Not sure what I’m doing wrong.
Sonf SBDongle Zigbee 3.0. Flashed with latest firmware from
Hardware: Raspberry PI 4
Config Yaml:
data_path: /config/zigbee2mqtt
socat:
enabled: false
master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: "-d -d"
log: false
mqtt:
server: mqtt://192.168.0.246:1883
base_topic: zigbee2mqtt
user: user-name
password: password
serial:
port: >-
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8219a3b62beed11bceda04838a92db5-if00-port0
adapter: ezsp
zigbee_herdsman_debug: true
>
Configuration.yaml in zigbee2mqtt folder:
homeassistant: true
advanced:
network_key:
- 83
- 181
- 163
- 44
- 249
- 109
- 170
- 53
- 161
- 28
- 122
- 61
- 162
- 212
- 11
- 42
pan_id: 27118
ext_pan_id:
- 110
- 105
- 167
- 37
- 58
- 211
- 188
- 35
mqtt:
server: mqtt://192.168.0.246:1883
serial:
port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8219a3b62beed11bceda04838a92db5-if00-port0
adapter: ezsp
frontend:
port: 8099
data_path: /config/zigbee2mqtt
Logfile:
2024-03-16T12:36:50.938Z zigbee-herdsman:adapter:ezsp:uart --> Error: Error: {"sequence":-1} after 10000ms
2024-03-16T12:36:51.092Z zigbee-herdsman:adapter:ezsp:erro Connection attempt 1 error: Error: Failure to connect
at SerialDriver.resetForReconnect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:350:19)
at SerialDriver.emit (node:events:517:28)
at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:348:22
at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:35:20)
at SerialDriver.openSerialPort (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:108:13)
at SerialDriver.connect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:63:13)
at Ezsp.connect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:356:17)
at Driver.startup (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/driver.ts:163:13)
at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:132:29)
at Zigbee.start (/app/lib/zigbee.ts:62:27)
2024-03-16T12:36:51.095Z zigbee-herdsman:adapter:ezsp:uart Port closed. Error? null
2024-03-16T12:36:51.096Z zigbee-herdsman:adapter:ezsp:ezsp onSerialClose()
2024-03-16T12:36:51.097Z zigbee-herdsman:adapter:ezsp:driv onEzspClose()
2024-03-16T12:36:51.097Z zigbee-herdsman:adapter:ezsp:debg onDriverClose()
2024-03-16T12:36:56.098Z zigbee-herdsman:adapter:ezsp:ezsp Next attempt 2
2024-03-16T12:36:56.099Z zigbee-herdsman:adapter:ezsp:uart RTS/CTS config is off, enabling software flow control.
2024-03-16T12:36:56.099Z zigbee-herdsman:adapter:ezsp:uart Opening SerialPort with {"path":"/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8219a3b62beed11bceda04838a92db5-if00-port0","baudRate":115200,"rtscts":false,"autoOpen":false,"parity":"none","stopBits":1,"xon":true,"xoff":true}
2024-03-16T12:36:56.111Z zigbee-herdsman:adapter:ezsp:uart Serialport opened
2024-03-16T12:36:56.112Z zigbee-herdsman:adapter:ezsp:uart Uart reseting
2024-03-16T12:36:56.112Z zigbee-herdsman:adapter:ezsp:uart --> Write reset
2024-03-16T12:36:56.113Z zigbee-herdsman:adapter:ezsp:uart --> [1ac038bc7e]
2024-03-16T12:36:56.114Z zigbee-herdsman:adapter:ezsp:uart -?- waiting reset
2024-03-16T12:37:06.122Z zigbee-herdsman:adapter:ezsp:uart --> Error: Error: {"sequence":-1} after 10000ms
2024-03-16T12:37:06.128Z zigbee-herdsman:adapter:ezsp:erro Connection attempt 2 error: Error: Failure to connect
at SerialDriver.resetForReconnect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:350:19)
at SerialDriver.emit (node:events:517:28)
at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:348:22
at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:35:20)
at SerialDriver.openSerialPort (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:108:13)
at SerialDriver.connect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:63:13)
at Ezsp.connect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:356:17)
at Driver.startup (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/driver.ts:163:13)
at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:132:29)
at Zigbee.start (/app/lib/zigbee.ts:62:27)
francisp
March 16, 2024, 4:19pm
84
You have a Sonoff Dongle P, but your configuration tells Zigbee2MQTT to use a Donge-E
Remove`` from serial
adapter: ezsp
or change it to
adapter: zstack
1 Like
kahilzinger
March 16, 2024, 11:00pm
85
Even if though this did not fix my situation, I am thankful you posted this site to make it easy to upgrade the firmware on my Zigbee controller. THANK YOU!
Still the same problem, though, with mine.
1 Like
maybe this is one of your problems:
So I have spent most of the morning searching the internet and have still managed to fail and switching from ZHA to MQTT. (I have removed all ZHA devices and deleted the integration.
I tried to read the documents about updating the firmware on the dongle via this Flashing the Sonoff ZBDongle-E to enable Matter, Thread and Zigbee on Home Assistant | Dialedin
Mosquito is installed.
Here is the error I get when I look at the log of the Zigbee2MQTT log.
[12:04:22] INFO: Preparing to start...
[1…
or you can try:
maybe try this one:
I use for the ConBee III stick the following:
port: /dev/ttyUSB0
adapter: deconz
baudrate: 115200
for EZSP try:
port: /dev/ttyUSB0
adapter: ezsp
baudrate: 115200
the note says also: “however note that some EZSP firmware need 57600”
port: /dev/ttyUSB0
adapter: zstack
baudrate: 115200
Timsche2210:
baudrate: 115200
I do not have the Multiprotocol add-on. Nothing suggested has worked. Here is all the information as of this point.
Configuration:
Log:
[09:03:48] INFO: Preparing to start…#unknown )Zigbee2MQTT fails to start | Zigbee2MQTT for possible solutions
Adapter information:
ttyACM0
EZSP
by Silicon Labs
Firmware: 7.3.1.0 build 176
Zigbee info
IEEE: 38:5b:44:ff:fe:00:36:5e
Nwk: 0x0000
Device Type: Coordinator
LQI: 255
RSSI: Unknown
Last seen: 2024-03-18T09:05:19
Power source: Mains
kahilzinger:
Device info
EZSP
by Silicon Labs
Firmware: 7.3.1.0 build 176
Zigbee info
IEEE: 38:5b:44:ff:fe:00:36:5e
Nwk: 0x0000
Device Type: Coordinator
LQI: 255
RSSI: Unknown
Last seen: 2024-03-18T09:05:19
Power source: Mains
Where are you getting this info from? To me it might seem you are getting this info because you have ZHA enabled. “Last seen” and “LQI” indicates that it is already running a zigbee network?
2 Likes
francisp
March 18, 2024, 2:34pm
89
That is what I was thinking. Seems not.
That was it! Is there any way I can import the devices from ZHA to the this or do I need to re-pair?
francisp
March 18, 2024, 4:27pm
91
You will need to re-pair.
1 Like
miklexow
March 28, 2024, 8:32pm
92
I initially typed “port: /dev/ttyUSB0” with a capital p → “Port: …” which gave the same error. after changing the P to lower case p it worked fine for me.
I found this thread while trying to resolve my own demons with zigbee2mqtt not starting on HomeAssistant Yellow.
My problem was solved by following the guide here: [Flash Silicon Labs radio firmware manually · NabuCasa/silabs-firmware Wiki · GitHub ] (Manually Flashing Silicon Labs radio firmware)
and flashing the firmware using:
universal-silabs-flasher --device /dev/ttyAMA1 flash --allow-cross-flashing --firmware EmberZNet/NabuCasa_Yellow_EZSP_v6.10.3.0_PA32_ncp-uart-hw_115200.gbl
Hope this helps someone else
Madman3332
April 13, 2024, 10:25am
94
Hello,
I seem to have the same issue, can anyone please suggest a solution?
Below is my log:
[14:13:00] INFO: Preparing to start…#unknown )Zigbee2MQTT fails to start | Zigbee2MQTT for possible solutions
The device I’m using is ZB-GW04 (easy iot EFR32MG21).
Device info:
Subsystem:
Below is my zigbee2mqtt config:
socat:
mqtt:
serial
configuration.yaml for zigbee2mqtt:
homeassistant: true