Esphome Builder cannot take control of ESP32-S3-BOX

Munky · December 27, 2024, 8:00pm

Hello,

I’m having an issue with a brand new ESP32-S3-BOX-3B. I have followed the instructions on the voice assistants tutorial, and the box gets flashed and added to home assistant just fine. I am able to control my devices by speaking to it without a problem. Now, the issue is when I want to customize the wake word (or anything else for that matter). In the Esphome Builder add-on, the device is discovered. When I attempt to “take control” of the device, however, the build breaks and I cannot get it to complete no matter what I do. The device gets added to the Esphome Builder dashboard and it shows online, but I cannot install a new configuration hence I cannot customize it. Here are the logs from the build. Please help

INFO ESPHome 2024.12.2
INFO Reading configuration /config/esphome/esp32-s3-box-3-52bb44.yaml...
INFO Updating https://github.com/esphome/esphome.git@pull/5230/head
INFO Updating https://github.com/jesserockz/esphome-components.git@None
WARNING GPIO0 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
INFO Generating C++ source...
INFO Updating https://github.com/espressif/[email protected]
INFO Updating https://github.com/jesserockz/esp32-s3-box-3-board.git@main
INFO Updating https://github.com/espressif/[email protected]
INFO Updating submodules (components/esp-sr, components/esp-adf-libs) for https://github.com/espressif/[email protected]
INFO Updating https://github.com/espressif/[email protected]
INFO Updating https://github.com/espressif/[email protected]
INFO Updating https://github.com/espressif/[email protected]
INFO Compiling app...
Processing esp32-s3-box-3-52bb44 (board: esp32s3box; framework: espidf; platform: https://github.com/pioarduino/platform-espressif32.git#51.03.07)
--------------------------------------------------------------------------------
HARDWARE: ESP32S3 240MHz, 320KB RAM, 16MB Flash
 - framework-espidf @ 3.50105.0 (5.1.5) 
 - tool-cmake @ 3.21.3 
 - tool-esptoolpy @ 4.8.1 
 - tool-mklittlefs @ 3.2.0 
 - tool-ninja @ 1.7.1 
 - tool-riscv32-esp-elf-gdb @ 12.1.0+20221002 
 - tool-xtensa-esp-elf-gdb @ 12.1.0+20221002 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-riscv32-esp @ 12.2.0+20230208 
 - toolchain-xtensa-esp32s3 @ 12.2.0+20230208
Reading CMake configuration...
-- git rev-parse returned 'fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).'
-- Building ESP-IDF components for target esp32s3
Processing 1 dependencies:
[1/1] idf (5.1.5)
-- Configuring incomplete, errors occurred!
See also "/data/build/esp32-s3-box-3-52bb44/.pioenvs/esp32-s3-box-3-52bb44/CMakeFiles/CMakeOutput.log".

fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Error at /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:266 (message):
  Failed to resolve component 'jsmn'.
Call Stack (most recent call first):
  /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:308 (__build_resolve_and_add_req)
  /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:603 (__build_expand_requirements)
  /data/cache/platformio/packages/framework-espidf/tools/cmake/project.cmake:604 (idf_build_process)
  CMakeLists.txt:3 (project)



========================== [FAILED] Took 2.25 seconds ==========================

ThePirat · December 28, 2024, 5:12pm

Exactly the same problem here…but with an M5Stack Atom Echo

INFO ESPHome 2024.12.2
INFO Reading configuration /config/esphome/m5stack-atom-echo-31192c.yaml...
INFO Updating https://github.com/esphome/esphome.git@pull/5230/head
INFO Updating https://github.com/jesserockz/esphome-components.git@None
INFO Generating C++ source...
INFO Core config, version or integrations changed, cleaning build files...
INFO Deleting /data/build/m5stack-atom-echo-31192c/.pioenvs
INFO Deleting /data/build/m5stack-atom-echo-31192c/.piolibdeps
INFO Updating https://github.com/espressif/[email protected]
INFO Updating https://github.com/espressif/[email protected]
INFO Updating submodules (components/esp-sr, components/esp-adf-libs) for https://github.com/espressif/[email protected]
INFO Updating https://github.com/espressif/[email protected]
INFO Updating https://github.com/espressif/[email protected]
INFO Updating https://github.com/espressif/[email protected]
INFO Compiling app...
Processing m5stack-atom-echo-31192c (board: m5stack-atom; framework: espidf; platform: https://github.com/pioarduino/platform-espressif32.git#51.03.07)
--------------------------------------------------------------------------------
Library Manager: Installing esphome/noise-c @ 0.1.6
INFO Installing esphome/noise-c @ 0.1.6
Unpacking  [####################################]  100%
Library Manager: [email protected] has been installed!
INFO [email protected] has been installed!
Library Manager: Resolving dependencies...
INFO Resolving dependencies...
Library Manager: Installing esphome/libsodium @ 1.10018.4
INFO Installing esphome/libsodium @ 1.10018.4
Unpacking  [####################################]  100%
Library Manager: [email protected] has been installed!
INFO [email protected] has been installed!
Library Manager: Installing kahrendt/ESPMicroSpeechFeatures @ 1.1.0
INFO Installing kahrendt/ESPMicroSpeechFeatures @ 1.1.0
Unpacking  [####################################]  100%
Library Manager: [email protected] has been installed!
INFO [email protected] has been installed!
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - framework-espidf @ 3.50105.0 (5.1.5) 
 - tool-cmake @ 3.21.3 
 - tool-esptoolpy @ 4.8.1 
 - tool-mklittlefs @ 3.2.0 
 - tool-ninja @ 1.7.1 
 - tool-riscv32-esp-elf-gdb @ 12.1.0+20221002 
 - tool-xtensa-esp-elf-gdb @ 12.1.0+20221002 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-xtensa-esp32 @ 12.2.0+20230208
Reading CMake configuration...
-- Found Git: /usr/bin/git (found version "2.39.5") 
-- git rev-parse returned 'fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).'
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Building ESP-IDF components for target esp32
NOTICE: Current idf-component-manager default lock file version is 2.0.0, but found 1.0.0 in /data/build/m5stack-atom-echo-31192c/dependencies.lock. Recreating lock file with the current version.
Manifest files have changed, solving dependencies.
.....NOTICE: Updating lock file at /data/build/m5stack-atom-echo-31192c/dependencies.lock
Processing 1 dependencies:
[1/1] idf (5.1.5)
-- Configuring incomplete, errors occurred!
See also "/data/build/m5stack-atom-echo-31192c/.pioenvs/m5stack-atom-echo-31192c/CMakeFiles/CMakeOutput.log".

fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Error at /data/cache/platformio/packages/framework-espidf@src-6e6cd5244a43bdfe453daac50cfe73b6/tools/cmake/build.cmake:266 (message):
  Failed to resolve component 'jsmn'.
Call Stack (most recent call first):
  /data/cache/platformio/packages/framework-espidf@src-6e6cd5244a43bdfe453daac50cfe73b6/tools/cmake/build.cmake:308 (__build_resolve_and_add_req)
  /data/cache/platformio/packages/framework-espidf@src-6e6cd5244a43bdfe453daac50cfe73b6/tools/cmake/build.cmake:603 (__build_expand_requirements)
  /data/cache/platformio/packages/framework-espidf@src-6e6cd5244a43bdfe453daac50cfe73b6/tools/cmake/project.cmake:604 (idf_build_process)
  CMakeLists.txt:3 (project)



========================= [FAILED] Took 10.19 seconds =========================

jturnley · December 28, 2024, 7:41pm

Same errors here on both types of devices that I just got (one box-3 and one echo). Did I pick a really bad time to try these?

Salviaguru · December 30, 2024, 10:24am

Yes, I have the same problem. Where to report this error to be included in the next fix?

boivinx7 · December 31, 2024, 2:28pm

Check here, im still testing for myself, but they seem to have fixed it

boivinx7 · January 1, 2025, 4:11pm

Ok so that did not work, so what i did is install a older ESPhome
esphome-legacy-addons

I turned off the main add-on
disabled auto start just in case
installed 2024.11 from the Legacy add-on
turned it on
then on its own webpage i was able to setup the device correctly
i had to reconfigure it from scratch from the ESPhome readymade projects page.

Now i have this issue:

lordbah · January 10, 2025, 6:29pm

What is this “not a git repository” about? What repository is it expecting, and where is it expecting to find it? This is an m5Stack Atom which has been updated using esphome command line in Linux until now when I’m trying to let HA ESPHome Builder ‘Take Control’ of it.

INFO Compiling app...
Processing livingroommic (board: m5stack-atom; framework: espidf; platform: https://github.com/pioarduino/platform-espressif32.git#51.03.07)
--------------------------------------------------------------------------------
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - framework-espidf @ 3.50105.0 (5.1.5) 
 - tool-cmake @ 3.21.3 
 - tool-esptoolpy @ 4.8.1 
 - tool-mklittlefs @ 3.2.0 
 - tool-ninja @ 1.7.1 
 - tool-riscv32-esp-elf-gdb @ 12.1.0+20221002 
 - tool-xtensa-esp-elf-gdb @ 12.1.0+20221002 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-xtensa-esp32 @ 12.2.0+20230208
Reading CMake configuration...
-- git rev-parse returned 'fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).'
-- Building ESP-IDF components for target esp32
Processing 1 dependencies:
[1/1] idf (5.1.5)
-- Configuring incomplete, errors occurred!
See also "/data/build/livingroommic/.pioenvs/livingroommic/CMakeFiles/CMakeOutput.log".

fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Error at /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:266 (message):
  Failed to resolve component 'jsmn'.
Call Stack (most recent call first):
  /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:308 (__build_resolve_and_add_req)
  /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:603 (__build_expand_requirements)
  /data/cache/platformio/packages/framework-espidf/tools/cmake/project.cmake:604 (idf_build_process)
  CMakeLists.txt:3 (project)



========================== [FAILED] Took 2.32 seconds ==========================

jancernik · January 10, 2025, 7:13pm

For anyone experiencing the same issue, check out this thread:

github.com/esphome/firmware

Unable to compile for M5Stack Atom Echo

opened 10:23AM - 18 Dec 24 UTC

Taomyn

Upgraded my Home Assistant ESPHome to 2024.12.0 and I cannot compile the firmwar…e for my M5Stack Atom Echo - I have other ESPHome devices that have all been successful so hopefully my environment is ok. The messages during the compile are: ``` INFO ESPHome 2024.12.0 INFO Reading configuration /config/esphome/m5ae-31b338.yaml... INFO Updating https://github.com/esphome/esphome.git@pull/5230/head INFO Updating https://github.com/jesserockz/esphome-components.git@None INFO Generating C++ source... INFO Updating https://github.com/espressif/[email protected] INFO Updating https://github.com/espressif/[email protected] INFO Updating submodules (components/esp-sr, components/esp-adf-libs) for https://github.com/espressif/[email protected] INFO Updating https://github.com/espressif/[email protected] INFO Updating https://github.com/espressif/[email protected] INFO Updating https://github.com/espressif/[email protected] INFO Compiling app... Processing m5ae-31b338 (board: m5stack-atom; framework: espidf; platform: https://github.com/pioarduino/platform-espressif32.git#51.03.07) -------------------------------------------------------------------------------- Library Manager: Installing esphome/noise-c @ 0.1.6 INFO Installing esphome/noise-c @ 0.1.6 Unpacking [####################################] 100% Library Manager: [email protected] has been installed! INFO [email protected] has been installed! Library Manager: Resolving dependencies... INFO Resolving dependencies... Library Manager: Installing esphome/libsodium @ 1.10018.4 INFO Installing esphome/libsodium @ 1.10018.4 Unpacking [####################################] 100% Library Manager: [email protected] has been installed! INFO [email protected] has been installed! Library Manager: Installing kahrendt/ESPMicroSpeechFeatures @ 1.1.0 INFO Installing kahrendt/ESPMicroSpeechFeatures @ 1.1.0 Unpacking [####################################] 100% Library Manager: [email protected] has been installed! INFO [email protected] has been installed! HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash - framework-espidf @ 3.50105.0 (5.1.5) - tool-cmake @ 3.21.3 - tool-esptoolpy @ 4.8.1 - tool-mklittlefs @ 3.2.0 - tool-ninja @ 1.7.1 - tool-riscv32-esp-elf-gdb @ 12.1.0+20221002 - tool-xtensa-esp-elf-gdb @ 12.1.0+20221002 - toolchain-esp32ulp @ 2.35.0-20220830 - toolchain-xtensa-esp32 @ 12.2.0+20230208 Reading CMake configuration... -- Found Git: /usr/bin/git (found version "2.39.5") -- git rev-parse returned 'fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).' -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /data/cache/platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-g++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Building ESP-IDF components for target esp32 NOTICE: Following dependencies have new versions available: Dependency "espressif/esp-nn": "1.0.2" -> "1.1.0" Consider running "idf.py update-dependencies" to update your lock file. Processing 1 dependencies: [1/1] idf (5.1.5) -- Configuring incomplete, errors occurred! See also "/data/build/m5ae-31b338/.pioenvs/m5ae-31b338/CMakeFiles/CMakeOutput.log". fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). CMake Error at /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:266 (message): Failed to resolve component 'jsmn'. Call Stack (most recent call first): /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:308 (__build_resolve_and_add_req) /data/cache/platformio/packages/framework-espidf/tools/cmake/build.cmake:603 (__build_expand_requirements) /data/cache/platformio/packages/framework-espidf/tools/cmake/project.cmake:604 (idf_build_process) CMakeLists.txt:3 (project) ========================== [FAILED] Took 3.40 seconds ========================== ``` My yaml config for the device, working fine until now, is: ``` substitutions: name: "m5ae-31b338" friendly_name: M5Stack Atom Echo 31b338 micro_wake_word_model: hey_jarvis # okay_nabu, hey_jarvis and hey_mycroft are supported packages: # m5stack.atom-echo-voice-assistant: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@main # m5stack.atom-echo-voice-assistant: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@cd57ca6f951d44cc5bf61de124a15b349ef1f9a4 # m5stack.atom-echo-voice-assistant: github://esphome/firmware/voice-assistant/m5stack-atom-echo.adopted.yaml@main m5stack.atom-echo-voice-assistant: github://esphome/firmware/wake-word-voice-assistant/m5stack-atom-echo.adopted.yaml@main esphome: name: ${name} name_add_mac_suffix: false friendly_name: ${friendly_name} api: encryption: key: <redacted> wifi: ssid: !secret wifi_ssid password: !secret wifi_password domain: .mydomain.com on_connect: - delay: 5s # Gives time for improv results to be transmitted ```

A workaround seems to be using an older version of esp-idf.
This worked for me on an ESP32-S3 DevKitC-1:

  framework:
    type: esp-idf
    version: 4.4.8
    platform_version: 5.4.0

lordbah · January 11, 2025, 4:09am

This resolved that particular problem. Further issues were resolved by something a little further down in the thread you reference, using wake-word-voice-assistant/m5stack-atom-echo.adopted.yaml@main.

Woody14619 · January 18, 2025, 12:02am

This also worked for building after the latest update for ESP32-S3-BOX for me as well. Thanks for the update. I’d have never gone looking in a M5Stack sub-forum for ESPHome/HA based stuff.