Esphome switches turning on by itself

[vangelis86]

Hi All,
Im facing a weird issue with my esp home integration. I have multiple sonoff wall switches flashed with ESPHome version 2022.3.1 and noticed that sometimes are randomly turning on. I went through home assistant debug log file but did not find something indicating the cause of this behavior. Also, not found any relation with any of my automations.
Did someone face a similar behavior? Is there something else I’m missing?
Thanks

[h3rb3rt (Herbert)]

Perhaps this is related to what I experiences with my Shelly devices and ESPhome

Help needed to troubleshoot ESPHome Momentary Switch delay

Hi, I have wired some light switches with Shelly1 which are running ESPHome. They were running Tasmota previously, and there I have never seen the issue. The Shelly1 extends a normal light switch setup, previously there was the light switch on the wall directly switching the light with 230V AC. The Shelly1 is now used to extend that setup with some features, the main feature is to turn off the light after 10 minutes if forgotten to be switched off via the light switch. So the light switch sh…

I migrated to Tasmota / Original Firmware to see if it is a hardware issue, but no. I have not seen the behavior on any Tasmota or Stock Firmware device only on the ESPHome devices.
And in my case it only turned off. I think the relay just dropped for whatever reason, but for sure not a powerloss.
I have another device where ESPHome works, the relay is there off and only being “turned on” for a second to get the garage open, there the garage never “opened” randomly.