Connect a monitor and keyboard to your Q920 and do the initial onboarding through direct connection. You should be able to configure LAN settings directly through the HA web interface.
Small update.
It seems like if I set the bios in UEFI mode I have only IP4 and IP6 as boot options, however, the device it shows on my local network.
If I set the bios in UEFI and Legacy mode, putting the SSD as boot point, I get only a constant black screen and the device doesn’t appear anymore on my local network.
I really don’t know about how to get out to this impasse…
Would this mini PC be able to install windows or linux at all?
If yes. I would do that, and then use the windows/linux as the host OS of an VM setup, and then run HAOS as an VM.
I mean, you absolutely could, but you don’t have to dedicate the entire box for HAOS.
The Fujitsu box is (way) overspec’d just for HAOS.
Well unless you have other considerations.
So, after some dig I discovered that other users had my same trouble with the same device, therefore the only solution I see is to utilize a VM.
I installed Proxmox and, consequently HAOS. Now I’ve a question, If I restore a backup from my instance installed and running on my raspberry, this will create some conflicts if I run them simultaneously (Raspberry and Fujitsu)?
For some reason, I needed to disable secure boot in the Proxmox BIOS when launching HA install. When on Proxmox7, I also got errors with ‘waiting until kernel time synchronized’ and ‘wait until come online’. These were likely caused by Proxmox 7 using Crono instead of timesync-d of Proxmox 6, so I needed to install 6.4 instead of 7.1, This did the job and now HA is running smoothly.
@PatBat any news about this stupid issue?
Or any other suggestion from you, guys, in order to run native HassOS on this mini-PC?
I am forced to run hassio as you, @PatBat, using Proxmox. By the way, what is your feedback about this alternative? Is it still working smoothly?
For anyone reading this, same problem appears on FUJITSU ESPRIMO Q556. I cannot set the hard drive to UEFI boot mode, only network adapter appears to work in UEFI boot mode.
In order to use Q920, I found a workaround, I used an USB 3.0 adaptor for SSD/HDD 2.5. It works perfect!
After you plug the USB, you need to enter in Boot menu and select USB as first boot device.
Hey Guys, I managed to do it (Install on Esprimo Q960)
In short:
Disable Secure Boot
Enable UEFI-Boot in CSM (Should be default) or UEFI and Legacy
Disable TPM Module (Might be optional, not sure)
After you flashed Home Assistant with balenaEtcher (Used a Live Ubuntu for this) you need to create the EFI Boot Sector, according to the Home Assistant Documentation here: Generic x86-64 - Home Assistant
I managed to get into BIOS, attached a USB keyboard and NOT the wireless that I was using. I think my refurb system had a really old BIOS, so I have send it return.
Getting into BIOS is with F2 - but don’t use a wireless keyboard
Hello everyone. Im also a “happy“ Fujitsu Esprimo Q920 owner
I managed to start the Service with the command sudo efibootmgr -c -l /EFI/BOOT/BOOTx64.EFI -L HomeAssistant . But now I have the problem of to many HAOS sectors… I dont really know if that is actually a problem. Does anybody know, if and how I could delete the no needed HAOS sectors?