HAGlow - UK Smart Meter Landis+Gyr KwH vs kvarh?

Hi,

Just got a HA Glow up and running, the readings are coming in very high.
Bit of digging, and the pulse is on another set of units than KwH
image

How can i adapt this?
Doing some googling, but coming up with more information than I know what to do with.
Has anyone else already solved this issue?

Any answers would be much appreciated.

Logs:
[17:32:29][I][ota:102]: Boot seems successful, resetting boot loop counter.
[17:32:29][D][esp32.preferences:114]: Saving preferences to flash...
[17:32:32][D][sensor:113]: 'House - Power consumption': Sending state 844.27771 W with 0 decimals of accuracy
[17:32:32][D][light:035]: 'Red' Setting:
[17:32:32][D][light:046]:   State: ON
[17:32:32][D][sensor:113]: 'House - Total energy': Sending state 0.22400 kWh with 3 decimals of accuracy
[17:32:32][D][sensor:113]: 'House - Power consumption': Sending state 189473.68750 W with 0 decimals of accuracy
[17:32:32][D][light:035]: 'Red' Setting:
[17:32:32][D][light:035]: 'Red' Setting:
[17:32:32][D][light:046]:   State: OFF
[17:32:32][D][light:035]: 'Red' Setting:
[17:32:36][D][sensor:113]: 'House - Power consumption': Sending state 832.36993 W with 0 decimals of accuracy
[17:32:36][D][light:035]: 'Red' Setting:
[17:32:36][D][light:046]:   State: ON
[17:32:36][D][sensor:113]: 'House - Total energy': Sending state 0.22600 kWh with 3 decimals of accuracy
[17:32:36][D][sensor:113]: 'House - Power consumption': Sending state 189473.68750 W with 0 decimals of accuracy
[17:32:36][D][light:035]: 'Red' Setting:
[17:32:37][D][light:035]: 'Red' Setting:
[17:32:37][D][light:046]:   State: OFF
[17:32:37][D][light:035]: 'Red' Setting:

Found line 117 with the internal_filter: 30ms
Seems to have calmed it down a bit - will monitor and see if its accurate now.