Hass.io exclude impossible

Configuration Z-Wave
1

My network is unstable. When using a physical switch the staus updates correctly in hass interface.
When clicking a switch in hass interface it just goes back to the way it was before.
So i was thinking about removing devices and then include them again…
But when trying to i always get this message:
2018-01-26 15:40:15.543 Info, FUNC_ID_ZW_REMOVE_NODE_FROM_NETWORK:
2018-01-26 15:40:15.543 Warning, WARNING: REMOVE_NODE_STATUS_FAILED
2018-01-26 15:40:15.543 Detail, Node007, Expected callbackId was received
2018-01-26 15:40:15.544 Detail, Node007, Expected reply was received
2018-01-26 15:40:15.544 Detail, Node007, Message transaction complete
2018-01-26 15:40:15.544 Detail,
2018-01-26 15:40:15.544 Detail, contrlr, Removing current message
2018-01-26 15:40:15.544 Detail, Notification: ControllerCommand - Failed

Need help please

2

Can you include some info on the devices you are using and relevant excerpts from your configuration.yaml please.

3

fibaro switch double
fibaro switch 2 double (2pcs)
Fibaro switch 2 single (7 pcs)
aeotec smart switch gen5 (2 pcs)
fibaro wall plug (2 pcs)
fibaro smoke sensor
fibaro flood sensor
aeotec door window sensor
aeotec multisensor
fibaro multisensor
aeotec smart dimmer6
aeotec micro dimmer
Qubino switch 2
wall-c wireless wall remote
popp wireless wall remote

zwave: (razberry card on pi3)
usb_path: /dev/ttyAMA0
network_key: “xxx removed xxx”

4

Is it possible to install zwave.me on a different sd card, boot up with that, remove devices and then boot up the hass.io card again or is that a bad idea?

5

What files do i need to copy or upload?

6

The same problem. How to fix it?
Using Z-Way everytime for excluding is bad idea.