On December 1, 2023, technology support for your Home or Business Area Network (HAN) will be discontinued. The HAN equipment is attached to your smart meter and provides real-time energy use information within your home and business. The decision to close the program was based on a combination of low customer adoption and rapidly evolving technology.
Currently connected HAN devices may remain connected until the HAN equipment fails or your smart meter is replaced. If your HAN device fails or becomes disconnected, we will be unable to reconnect the HAN device, and no new home or business devices can be added to the network.
You still have access to your usage data
If you would like a copy of your past energy use through Green Button, you can download your data. Not sure how to download your data? Here are instructions to help you.
You can also review your energy use history in My Account. Log in and click the āusageā tab.
If you have any questions on the change to your Home Area Network, please send us an email at [email protected].
Thank you,
Home Area Network Team
San Diego Gas & Electric
So it looks like things like the Rainforest Eagle are going to keep working as long as your meter/etc doesā¦ but after that, youāre SOL. Really a bummer. I guess Iāll have to figure out how to get my Shelly clamp stuff workingā¦
Yeah, pretty ridiculous that the suggested alternative is to download a spreadsheet of historical data from the website. They never really used it to full advantage, such as providing accurate, real time rates. I just ordered an IotaWatt to collect my own data.
Iām serious about my post. Supporting these devices is a mandate from CPUC and a quick search doesnāt indicate that this requirement to support HAN devices with smart meters has been rescinded.
While itās possible I missed something, filing a complaint will get a clear answer- is SDG&E allowed to abandon this support?
Thanks for raising that. I was able to find this, where I think the original mandate was made back in 2011, and I also couldnāt find anything rescinding that requirement. I sent SDG&E an email.
The other benefit of the CPUC complaint is that youād be able to make clear to the agency that the delayed data coming from green button is not a viable alternative to real time info.
I did write to that email address they provided. Probably leads to little, letās see. Their letter shows so much laziness and lack of interest to be customer friendly. I guess nothing new really, thatās how they have been for the last 30 years I lived here.
Writing to SDG&E isnāt going to change what happens, New Complaint - CIMSCoreApplication filling out a complaint form with the state regulator is the only thing that has any chance of getting this reversed. While the PUC isnāt perfect, they can be quite effective when the law/regulations are on your side.
True but addressing the company is what needs to happen first. Filing the complaint also asks for this. Anyway, I did also file a complaint with state regulator.
I did raise the issue with SDG&E and filed a complaint with CPUC also highlighting āDecision 11-07-056 July 28, 2011ā. Received an answer from CPUC today, that SDG&E is handling all this correctly, and that a plurality of alternatives exist to obtain said data. ā¦ Basically a F.Y.
It gets better, SDG&E has (proactively) shut me off it seems. Since dec 19, no more values from the eagle device. Thatāll teach ya writing up a complaint.
I had an automation watching for this device to change from unknown to any value. A few hours ago, mine magically came back online. Who knows how long it will last, but itās providing correct valuesā¦ hopefully someone rebooted the server, or better yet, they were forced to keep it running. No ideaā¦
Could you post copies your complaint and the CPUCās response? Also, have you considered sending those to UCAN ā Utility Consumersā Action Network, the nonprofit watchdog that intervenes at the CPUC on behalf of ratepayers in SDG&Eās territory ā to see whether they could raise the alarm on this?
I was unaware of this change until my Emporia Vue Utility Connect device stopped updating from my smart meter yesterday (March 17) at noon. I only found out about the SDG&E support change when I contacted Emporia for support.
Has anyone had any success asking SDG&E to support connections from existing HAN devices that were purchased and connected prior to the December 1 change?
Iām pretty frustrated by this. I do not have room to install consumption monitoring clamps in my panel, so this smart meter reader device was my only alternative. Downloading yesterdayās data from Green button is no way to monitor your home energy consumption!
Iām ready to complain to SDG&E but not expecting a lot of concern. Would appreciate pointers from anyone already bashing their heads against this wall.
CPUC nor SDG&E cares, there are just too few people who used these kind of monitoring devices. Iād wouldnāt waste energy pursueing these guys.
A possible alternative route might be to pick up the zigbee signal with an SDR and decode directly. I have a cheapo (20 bucks) SDR laying around for that purpose but no time yet to mess with it.
My emporia vue has been less and less reliable. It stops reporting for a while - hours or days and then I get a big ācatch-upā of all the missed usage at once and it works for a time. Rinse and repeat. I donāt have a good way of installing CTs in my panel either without involving SDGE and electrician.
Has anyone figured out how to automate green button data import or RTL-SDR? Iād assume their signal even if available would be encrypted.
From an SDGE employee working on the HAN program:
Unfortunately when the program was shuttered at the end of 2023 there was no direct replacement for the HAN program that was put in place. The only alternative we were directed to let folks know about was Green Button which was ānear real-timeā usage where you could view 15 minute interval usage data in the most recent interval.
This provided a similar function but not a direct replacement for viewing real time data. I have not heard of any new directives or plans to provide this service again in the near future, it could potentially come back in another form but we currently do not have a timeline for that. I wish I had a work around for folks but the portal/service we were previously using is no longer in service due to lack of funding in the latest GRC and the contract with the vendor was never renewed.
How they handled the sunsetting of the service was also not the best and rather abrupt from both a user perspective as well as those maintaining and working on it on a daily basis. Iām hopefully the functionality will return as the new Smart Meter project is rolled out in the next few years.
