Does anybody has Hob2Hood IR codes (Electrolux, AEG) to use with Broadlink remote?
Hi,
Were you able to find them?
I have seen this project defining IR codes:
Not sure though if you can use them in Broadlink easily.
I would like to use BroadLink remote to get Hob2Hood IR codes into Home Assistant.
I wonder if you just did this.
Cheers,
Wojciech
I know this.
Sorry, but I can’t use this with Bradlink.
After YEARS of searching. I stumbled across this page;
…and the codes are
“”{
“hob2hood”: {
“off”: [
“JgAPABcwFzBFMBcwLkgXMBcXFg0FAAAAAAAAAA==”,
“JgAPABgwFjBFMBcwLkgXMBcXFg0FAAAAAAAAAA==”,
“JgAPABgwFzBEMRcwLkcYMBcXFg0FAAAAAAAAAA==”
],
“speed1”: [
“JgAPAC4xFzNAMRcwFxcXMBdIFg0FAAAAAAAAAA==”,
“JgAPAC4xFzBFMBcwFxcXMBZIFg0FAAAAAAAAAA==”,
“JgAPAC8wFzBEMRYwFxcXMBdIFg0FAAAAAAAAAA==”
],
“speed2”: [
“JgAJAC8wF2AYR3NJRQ0FAAAAAAAAAAAAAAAAAA==”,
“JgAJAC8wF2EWSXJIRg0FAAAAAAAAAAAAAAAAAA==”,
“JgAJAC8wF2AXSXJIRg0FAAAAAAAAAAAAAAAAAA==”
],
“speed3”: [
“JgAJABZJW2FFGBdIRQ0FAAAAAAAAAAAAAAAAAA==”,
“JgAJABdJXGBGFxZJRA0FAAAAAAAAAAAAAAAAAA==”,
“JgAJABdJXGFFFxdIRQ0FAAAAAAAAAAAAAAAAAA==”
],
“speed4”: [
“JgANAC5JLhcuSC4wF0gXFy0NBQAAAAAAAAAAAA==”,
“JgANAC5ILxcuRy8wF0gWGC4NBQAAAAAAAAAAAA==”,
“JgANAC5JLhcuRy4xF0cYFy0NBQAAAAAAAAAAAA==”
],
“lighton”: [
“JgARABcwFxctGBcwFhgtYhcXFxctDQUAAAAAAA==”,
“JgARABcwFxctGBcwFxcuYRYYFhgtDQUAAAAAAA==”,
“JgARABgwFxcuFxYxFxctYRgXFxctDQUAAAAAAA==”
],
“lightoff”: [
“JgARABYwFRkWGBZKFRkUMhYxFhkVDQUAAAAAAA==”,
“JgARABcxFRkUGhVJFRkWMhUxFhkVDQUAAAAAAA==”,
“JgARABUyFhkVGBZKFhgXMBYxFhkVDQUAAAAAAA==”
]
}
}R-Codes""