This is great! The only thing not working is installing HACS.
Archive: /var/tmp/hacs.zip
unzip: open('homeassistant/custom_components/hacs/const.py'): No such file or directory
Press ENTER to continue...
Worked here. Used winSCP to updload the files.
Followed the instructions here.
To update to latest version of HA do i have to wait for the plugin manager to update it? or is there anyway to update it manualy?
Yes – I added a console menu to make it easier to use from the FreeNAS webui
When you log into the HA plugin console – there should see main menu
Use number 1 for Home Assistant
Use number 4 to upgrade HA
OR – You can use the command line
service homeassistant upgrade
No – The plugin manager will never update HA or any other virtualenv
- I will always leave this in your control
The plugin manager will only update the FreeBSD system packages. It will also update the system files I provided with the plugin. For example, when I add ( or need to fix ) something in the console menu – or when there is an update to the service script
1 Like
Uau 
damn you’re the MAN! thanks
1 Like
Troy - really appreciate the massive effort you’ve put into making a Freenas plugin for HA. Can’t thank you enough.
Does anyone have any experience of installing Zigbee2mqtt on Freenass? I’m trying to hook up some Xiaomi sensors. The official instructions over at www.zigbee2mqtt.io give guidance on running on a bare-metal Linux and virtualized environments, but as we know Freenas is basically Freebsd and I am out of my depth with that, the syntax and commands are not the same and although I can handle using the command line I tend to struggle a bit at the best of times.
Is it necessary to install Zigbee2mqtt in a separate jail from the main HA jail?
Is it possible to install Hass.io on freenas? Zigbee2mqtt is available as an official addon for that.
Any help much appreciated
- What kind of zigbee hub do you have? Is it a USB device?
With a few extra steps – USB devices like the HUSBZB-1 can be used by HA directly.
- Is there a reason you do not connect directly to HA?
- Is there a reason you want ( or need ) to use
Zigbee2mqtt?
I’m asking so I can understand if you have a different use case that would require Zigbee2mqtt.
If you want to install Zigbee2mqtt I would strongly recommend a separate jail –
In any case – To connect a USB zigbee or zwave hub, to any jail on FreeNAS
This is something separate – I can only say where to look.
1 Like
My device is USB - a GBAN GB2530 which according the Zigbee2mqtt github page is compatible.
According to my understanding, I need to use Zigbee2mqtt to use Xiaomi sensors. My device has been flashed with the relevant co-coordinator firmware.
I tried adding it direct to HA as a ZHA integration but no dice. I believe I have the custom ruleset working as when I type “usbconfig” in the HA jail I can see the device listed as "“silicon labs cp2102 usb to uart bridge controller at usbbus1, cfg=0 md=host spg=full (12mbps) power=on (100mA)”
But when I try add /dev/cuaU0 it doesn’t work even although I can see cuaU0 in the /dev folder in the jail.
Anyway, happy to go with a dedicated jail for Zigbee2mqtt if that is best.
Yes this means the ruleset is setup correctly
Ok – Check back in a day or two… I’ll have a look at the installation instruction and get something put together for you.
1 Like
Hi Troy,
Thanks for your wonderful works. I’ve followed your instructions and everything is working perfectly.
I’m so new to this. I’ve used to add things in hass.io add-ons store and I think there is no add-ons store in this kind of setup. Can you please point me to the right direction on how to do these things?
Samba share
Setup SSL
Integrate with Duck DNS
Thanks a lot,
- Klang
You are correct – There is no add-on store. Having the add-on store can definitely be a great advantage, especially for new users. However most anything provided by the add-on store can be installed and configured separately. For example, ssh and samba are both provided by FreeNAS – So there is no need to have seperate “add-ons” for these.
– In terms of Home Assistant Add-ons, these are just separate containers, and specifically with the “Home Assistant Supervised” you get the ability to manage and have basic configuration of these separate contains through Home Assistant.
– In this setup you would be looking for other FreeNAS plugins. Two common examples, there are FreeNAS plugins for Mosquitto and Node-Red. Using the FreeNAS plugins will be more along the line of a manual setup. Also there are very few FreeNAS plugins compared to the number of Home Assistant Add-ons.
I see you have already found this post about about running Home Assistant Supervised on FreeNAS. Are you switching to use this approach instead?
If you are going to stick with the FreeNAS plugins I can help you get Samba share working
Is this for remote access? I had this working several years ago, I don’t remember it being terrible to setup. I’ll have to look for the link I followed. Honestly, I have been supporting HA through NabuCasa since it started. I realize it may not be for everybody, but in my opinion it’s the best way to both support Home Assistant and get secure remote access that just works.
Hi Troy,
Thanks for your reply.
And yes, I’m experimenting the Freenas VM approach.
Let me tell you that I was so impressed when I first restart HA with your setup. It was mind blowing fast like 2-3 seconds compare to the Rasberry Pi 3 which would take about … forever.
Unfortunately, since I’m not the expert, I think I’m leaning to Hass.io with add-ons store for now.
Thanks a lot for your help,
- Klang
Hi
Was installing “Z-Wave over MQTT Integration”. That requires to install openzwave daemon from a custom repository (seems very easy with hass.io, but can’t find any instruction when you don’t have hass.io). Any idea how to do that?
/Martin
Hi Troy,
Many thanks for your work on this! It makes life very easy to installed HA!
There is one thing I just can not get AppDaemon running? I managed to create a token for this app & placed it into secretes. Try to start AppDaemon from side panel, it give me a blank page with nothing happening.
Try to go back to Freenas shell to see status --it say not running–
try to remove and reinstalled again, but still wouldn’t run?
Is there anything I have done wrong?
many thanks
I’m trying to figure this out myself – If ( and that’s a big if ) I can get it working I’ll make a seperate FreeNAS plugin to make it easier to install…
For now, I’m just using a dedicate RPI 3 – running raspbian-lite w/docker. So far it’s been working great w/HA on the FreeNAS
The side panel is just an Iframe link – You would need to use the FreeNAS shell ( Technically the jail shell ) to start appdaemon. The side panel will not unless appdaemon is already running
Usually it’s because the secrets is missing but since you added that already 
– Let me give a quick test and make sure nothing has changed with the latest release of appdaemon … Just waking up here. Might be a few hours …
@Raymond_Cheung, I’m so sorry – I got completely sidetracked and forgot to report I installed AppDaemon with no issues…
Were you able to get this running yet? So the most likely cause it’s not running something in the configuration … I can try to help you get it sorted if your still troubleshooting it
I’m also unable to get Appdaemon running. Navigating the the appropriate url doesn’t work. Have tried restarting appdaemon, and also reinstalling it. If I select start, or restart, it says its starting but selecting the status option always shows it as not running. Any ideas?
EDIT: I worked it out. It seems setting time zone is critical for it to run and there is nothing in the documentation about setting time zone location properly. Using the default America/chicago allows it to run. I’m in UK/London, which didn’t work. I needed to change this to Europe/london.
Troy - I’m going to need your help again (sorry!)
In your original install thread you helped me get a hass-apps working as outlined in this post:
However, I can’t get it working with your new 11.3 install. I’ve followed the same procedure except that to get into the jail I just used the jexec command as your original help would just lead me to your scripted menu system. Can’t get Schedy to work. Would really appreciate your help (again!) 
Hi Troy,
Got it running now! It is the changing of the location data that is the corporate. In my area I change to New Zealand/Auckland which didn’t work. So revert back to the default America/Chicago. But anyway that will do for now.
Hi Troy, is there anyway to have IDE or a good text editor running on the HA core? Our current configurator is not very good. Under hassio it’s very easy but HA core looks impossible.
What editor are you using & hows that installed?
So basically what’s going on here … When appdaemon is pip installed (on any system), there are no configuration files provided … I have put together and included the configuration files that come with the FN plugin based on the AppDaemon configuration docs found here – I’m not sure where to find the correct format for each of your correct TZ locations but that should just be a general question for the appdaemon folks.
Really, this FN plugin has only added a pretty menu for convenience. There is still a serious lack of documentation of my part to explain everything that’s always been included since my first guide for FN 11 … But it boils down to this – The FN plugin is basically just a script to create a virtualenv and do a simple pip install – Just like the manual installation guides – The only thing I have really “created” are the FreeBSD init scripts used to run these programs. Even the HA Docs for FN use my init script – only difference are two variables, the default user and location of the virtualenv. – I some point, I swear I’ll get this documented to bridge that gap between clicking the install plugin button and understanding where to go next.