Home Assistant Voice PE - led ring as energy consumption readout

Jieper001 · January 31, 2025, 5:32pm

Hi,

I would like to use the Home Assistant Voice PE Led Ring to represent my energy consumption. I have all the sensors available, would would need to find a way how the “link” the indivdual leds to the sensor. Any pointers how I go about? (a bit of a n00b tbh). THANK YOU

Jieper001 · January 31, 2025, 5:46pm

A bit like the “gauge card” but then on the phyiscal hardware; the voice PE

nickrout · February 1, 2025, 12:17pm

The definitions for the leds starts here

github.com

esphome/home-assistant-voice-pe/blob/5288dde504325130d50f9465b92a6d712203f49a/home-assistant-voice.yaml#L554


      
                - script.execute: control_leds
                - delay: 200ms
                - script.execute:
                    id: play_sound
                    priority: false
                    sound_file: !lambda return id(jack_disconnected_sound);
                - delay: 800ms
                - lambda: id(jack_unplugged_recently) = false;
                - script.execute: control_leds
          
          light:
            # Hardware LED ring. Not used because remapping needed
            - platform: esp32_rmt_led_strip
              id: leds_internal
              pin: GPIO21
              rmt_channel: 1
              num_leds: 12
              rgb_order: GRB
              chipset: WS2812
              default_transition_length: 0ms
              power_supply: led_power