Homematic CCU3 - HA

Configuration
1

Hi!

I need help with the configuration. I get this logs:

2019-11-20 21:05:02 WARNING (MainThread) [homeassistant.setup] Setup of homematic is taking over 10 seconds.
2019-11-20 21:06:59 WARNING (SyncWorker_19) [pyhomematic._hm] Failed to initialize proxy
2019-11-20 21:09:06 WARNING (SyncWorker_19) [pyhomematic._hm] Failed to initialize proxy
2019-11-20 21:11:14 WARNING (SyncWorker_19) [pyhomematic._hm] Failed to initialize proxy
2019-11-20 21:13:21 ERROR (SyncWorker_10) [pyhomematic._hm] RPCFunctions.jsonRpcPost: Exception: <urlopen error [Errno 110] Operation timed out>
2019-11-20 21:13:21 WARNING (SyncWorker_10) [pyhomematic._hm] ServerThread.jsonRpcLogin: Unable to open session.

My configuration.yaml is:

homematic:
  interfaces:
    rf:
      host: 192.168.0.225
      resolvenames: json
      username: Admin
      password: XXX
    wired:
      host: 192.168.0.225
      port: 2000
      resolvenames: json
      username: Admin
      password: XXX
    ip:
      host: 192.168.0.225
      port: 2010
  hosts:
    ccu2:
      host: 192.168.0.225
      username: Admin
      password: XXX

Thanks for your help.

Alex

2

Hi Alex, could be a problem with the firewall setting in your Homematic CCU3. Have you opened the firewall in CCU3 for your HA IP-Address?

3

The firewall is configered:

Firewall - all Ports are open
Homematic XML: Full access
Remote Homematic: Full
Mediolo: Blocked

4

I think that‘s ok. But how about the IP addresses? You need to put your HA IP address into the box below the other settings. See the picture below.

image
image1259×180 37.7 KB