Hi,
I have a 718+ Synology NAS and I am trying to get the conbee stick working.
But now I am completely stuck. What should I do next? I tried adding Deconz in HA via integrations. But it says it cannot find an API key.
Thanks!
I just got my Conbee stick working on DS918+ in docker.
Which container do you use ? I use “marthoc/deconz”
I had to SSH to the nas and run 2 commands to load the drivers for the Conbee:
sudo insmod /lib/modules/usbserial.ko
sudo insmod /lib/modules/ftdi_sio.ko
Then you should be able to find the usb under /dev/ttyUSB0
then you need to run the docker container with “high privilege” as Synology docker does not support the “–device” command.
Thank you for the hints, this worked for me on my DS218+. I can find the conbee and can trigger lamps etc. My problem is, that /dev/ttyUSB0 cannot be found after a restart of the diskstation. It works again, when I have connected via SSH and called the two commands above (usbserial.ko and ftdi_sio.ko). How can I set it up, that the conbee is found everytime on a startup of the diskstation, that I don’t have to load the drivers for Conbee everytime?
I found a possibility do this during a startup script from
Latest spec from https://github.com/marthoc/docker-deconz shows option as: -e DECONZ_DEVICE=/dev/ttyUSB1. So I just put it into Synology UI as:
.So you can easily specify any usb device here. to detect which one is used by conbeeII - ssh to your diskstation and run: ls ls /dev/ttyA*
Hope this will help to somebody… )
HI guys,
I’m new with deConz.
I installed Docker on my fresh new DS220+ and I installed marthoc/deconz version.
I tried to configure the network conf as bridgeed or host but I get always the same messages in log files in docker.
Could you please help me ?
How to fix my configuration ?
How to reach Phoscon web app ?
2020-11-03 20:22:51 stdout [marthoc/deconz] VNC Disabled
2020-11-03 20:22:51 stdout [marthoc/deconz] Websockets port: 443
2020-11-03 20:22:51 stdout [marthoc/deconz] Web UI port: 80
2020-11-03 20:22:51 stdout [marthoc/deconz] Current deCONZ version: 2.05.86
2020-11-03 20:22:51 stdout [marthoc/deconz] Starting deCONZ...
2020-11-03 20:22:54 stdout 20:22:54:460 HTTP Server listen on address 0.0.0.0, port: 80, root: /usr/share/deCONZ/webapp/
2020-11-03 20:22:54 stdout libpng warning: iCCP: known incorrect sRGB profile
2020-11-03 20:22:54 stdout QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
2020-11-03 20:22:55 stdout 20:22:55:985 ZCLDB init file /root/.local/share/dresden-elektronik/deCONZ/zcldb.txt
2020-11-03 20:22:55 stdout 20:22:55:797 CTRL. 3.27.220:22:55:984 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:22:57 stdout This plugin does not support propagateSizeHints()
2020-11-03 20:22:57 stdout This plugin does not support propagateSizeHints()
2020-11-03 20:22:57 stdout 20:22:57:694 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:22:57 stdout 20:22:57:615 found node plugin: libstd_otau_plugin.so - STD OTAU Plugin
2020-11-03 20:22:57 stdout 20:22:57:596 found node plugin: libde_signal_plugin.so - Signal Monitor Plugin
2020-11-03 20:22:57 stdout 20:22:57:586 found node plugin: libde_rest_plugin.so - REST API Plugin
2020-11-03 20:22:57 stdout 20:22:57:586 dlg action: Read binding table
2020-11-03 20:22:57 stdout 20:22:57:585 [INFO] - Button maps loaded.
2020-11-03 20:22:57 stdout 20:22:57:583 [ERROR] - Button map 'sunricherCCTMap' in JSON file has no assigned ModelIDs. Skip loading button map...
2020-11-03 20:22:57 stdout 20:22:57:571 [INFO] - Found file containing button maps. Parsing data...
2020-11-03 20:22:57 stdout 20:22:57:554 started websocket server at port 443
2020-11-03 20:22:57 stdout 20:22:57:544 DB create temporary views
2020-11-03 20:22:57 stdout 20:22:57:344 DB cleanup
2020-11-03 20:22:57 stdout 20:22:57:343 DB PRAGMA user_version: 7
2020-11-03 20:22:57 stdout 20:22:57:343 DB file size 135168 bytes, free pages 0
2020-11-03 20:22:57 stdout 20:22:57:343 DB PRAGMA freelist_count: 0
2020-11-03 20:22:57 stdout 20:22:57:343 DB PRAGMA page_size: 4096
2020-11-03 20:22:57 stdout 20:22:57:343 DB PRAGMA page_count: 33
2020-11-03 20:22:57 stdout 20:22:57:343 DB sqlite version 3.27.2
2020-11-03 20:22:57 stdout 20:22:57:324 GW sd-card image version file does not exist: /root/.local/share/dresden-elektronik/deCONZ/gw-version
2020-11-03 20:22:57 stdout 20:22:57:324 gw run mode: docker
2020-11-03 20:22:57 stdout 20:22:57:324 parent process /bin/sh
2020-11-03 20:22:58 stdout 20:22:58:776 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:23:00 stdout 20:23:00:794 wait reconnect 15 seconds
2020-11-03 20:23:00 stdout 20:22:59:827 device disconnected reason: 4, index: 0
2020-11-03 20:23:01 stdout 20:23:01:816 wait reconnect 14 seconds
2020-11-03 20:23:01 stdout 20:23:00:873 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:23:03 stdout 20:23:03:910 Announced to internet https://phoscon.de/discover
2020-11-03 20:23:03 stdout 20:23:03:816 wait reconnect 12 seconds
2020-11-03 20:23:03 stdout 20:23:03:223 wait reconnect 13 seconds
2020-11-03 20:23:04 stdout 20:23:04:816 wait reconnect 11 seconds
2020-11-03 20:23:05 stdout 20:23:05:816 wait reconnect 10 seconds
2020-11-03 20:23:06 stdout 20:23:06:815 wait reconnect 9 seconds
2020-11-03 20:23:07 stdout 20:23:07:816 wait reconnect 8 seconds
2020-11-03 20:23:08 stdout 20:23:08:815 wait reconnect 7 seconds
2020-11-03 20:23:09 stdout 20:23:09:816 wait reconnect 6 seconds
2020-11-03 20:23:10 stdout 20:23:10:815 wait reconnect 5 seconds
2020-11-03 20:23:11 stdout 20:23:11:816 wait reconnect 4 seconds
2020-11-03 20:23:12 stdout 20:23:12:816 wait reconnect 3 seconds
2020-11-03 20:23:13 stdout 20:23:13:817 wait reconnect 2 seconds
2020-11-03 20:23:13 stdout 20:23:12:902 GW update firmware found: /usr/share/deCONZ/firmware/deCONZ_ConBeeII_0x26660700.bin.GCF
2020-11-03 20:23:14 stdout 20:23:14:815 wait reconnect 1 seconds
2020-11-03 20:23:16 stdout 20:23:16:816 wait reconnect 14 seconds
2020-11-03 20:23:16 stdout 20:23:15:893 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:23:16 stdout 20:23:15:816 wait reconnect 15 seconds
2020-11-03 20:23:16 stdout 20:23:15:126 device disconnected reason: 4, index: 0
2020-11-03 20:23:16 stdout 20:23:14:893 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:23:18 stdout 20:23:18:816 wait reconnect 12 seconds
2020-11-03 20:23:18 stdout 20:23:17:815 wait reconnect 13 seconds
2020-11-03 20:23:18 stdout 20:23:17:815 start reconnect to network
2020-11-03 20:23:19 stdout 20:23:19:817 wait reconnect 11 seconds
2020-11-03 20:23:20 stdout 20:23:20:816 wait reconnect 10 seconds
2020-11-03 20:23:21 stdout 20:23:21:816 wait reconnect 9 seconds
2020-11-03 20:23:22 stdout 20:23:22:815 failed to reconnect to network try=1
2020-11-03 20:23:23 stdout 20:23:23:815 wait reconnect 7 seconds
2020-11-03 20:23:23 stdout 20:23:22:816 wait reconnect 8 seconds
2020-11-03 20:23:24 stdout 20:23:24:816 wait reconnect 6 seconds
2020-11-03 20:23:25 stdout 20:23:25:816 wait reconnect 5 seconds
2020-11-03 20:23:26 stdout 20:23:26:816 wait reconnect 4 seconds
2020-11-03 20:23:27 stdout 20:23:27:816 wait reconnect 3 seconds
2020-11-03 20:23:27 stdout 20:23:27:816 failed to reconnect to network try=2
2020-11-03 20:23:28 stdout 20:23:28:816 wait reconnect 2 seconds
2020-11-03 20:23:29 stdout 20:23:29:906 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:23:29 stdout 20:23:29:816 wait reconnect 1 seconds
2020-11-03 20:23:30 stdout 20:23:30:815 wait reconnect 15 seconds
2020-11-03 20:23:30 stdout 20:23:30:253 device disconnected reason: 4, index: 0
2020-11-03 20:23:31 stdout 20:23:31:817 wait reconnect 14 seconds
2020-11-03 20:23:31 stdout 20:23:30:892 COM: --dev: /dev/ttyUSB0 (ConBee)
2020-11-03 20:23:32 stdout 20:23:32:816 failed to reconnect to network try=3
2020-11-03 20:23:33 stdout 20:23:33:816 wait reconnect 12 seconds
2020-11-03 20:23:33 stdout 20:23:32:817 wait reconnect 13 seconds
2020-11-03 20:23:34 stdout 20:23:34:816 wait reconnect 11 seconds
2020-11-03 20:23:35 stdout 20:23:35:815 wait reconnect 10 seconds
2020-11-03 20:23:36 stdout 20:23:36:816 wait reconnect 9 seconds
2020-11-03 20:23:37 stdout 20:23:37:816 wait reconnect 8 seconds
2020-11-03 20:23:37 stdout 20:23:37:815 failed to reconnect to network try=4
2020-11-03 20:23:38 stdout 20:23:38:816 wait reconnect 7 seconds
2020-11-03 20:23:39 stdout 20:23:39:816 wait reconnect 6 seconds
2020-11-03 20:23:40 stdout 20:23:40:816 wait reconnect 5 seconds
2020-11-03 20:23:41 stdout 20:23:41:816 wait reconnect 4 seconds
2020-11-03 20:23:42 stdout 20:23:42:816 failed to reconnect to network try=5
I have also set up a Conbee II in my DS220+ with marthoc/deconz. To get to the portal I set my network to bridged and added a port mapping from the container port 80 to an external port (eg 8032). I then reach Phoscon the portal via http://nas-ip:8032
Most of these steps seem overly complicated. I added my Conbee 2 by doing:
sudo chmod 777 /dev/ttyACM0( I actually ran for a while without even step 2. YMMV. )
This way, you can run the ZHA integration directly from within HA, and no need for extra images. When HA detects the Conbee, and you are installing ZHA integration, it will present ConBee as the only choice.
This is the way.
Need help! I have installed DSM7 today. Since the Conbee isn´t recognized. The USB stick is shown in control panel and via SSH (lsusb). Is there an easy way to figure out the path?