Inofficial Zigbee Router firmware released for ITead Sonoff ZBBridge and ZB-GW03 Zigbee gateways/bridges as alternative when used with Tasmota and/or ESPHome

Configuration Zigbee
, , , ,
6

FYI, the same Zigbee Router firmware has now also been tested with ESPHome on a ZB-GW03 eWeLink Ethernet Zigbee Gateway which is based on ESP32 instead but have the same “SM-011 V1.0” EFR32MG21 Zigbee module by CoolKit that ITead uses in their Sonoff ZBBridge Zigbee Bridge:

https://github.com/syssi/esphome-zb-gw03/blob/main/docs/router.md

https://github.com/syssi/esphome-zb-gw03/issues/12

ZB-GW03 eWeLink Ethernet Zigbee Gateway ZB-GW03 v1.0 / V1.2 is based on ESP32 and have RJ-45 Ethernet port, it is also sold rebranded under many names, including EACHEN and SmartWise brands:

https://community.home-assistant.io/t/zb-gw03-ewelink-ethernet-zigbee-gateway-now-hacked-with-tasmota-zbbridge-so-can-be-used-via-mqtt-or-as-a-remote-zigbee-adapter-with-home-assistant-zha-and-zigbee2mqtt/341223/

ESPHome can be installed on both the ESP32 based ZB-GW03 and the ESP8266/ESP8285 based ZBBridge Zigbee Bridge:

https://github.com/syssi/esphome-zb-gw03/

https://github.com/thegroove/esphome-zbbridge/