Installing Home Assistant Supervised using Debian 12

aerodolphin · October 5, 2020, 8:05am

Yes. We must select on the part of mirror to the sources, yes.

It will work this way.

rcblackwell · October 5, 2020, 9:51pm

David,

Thank you. With your guidance I have successfully installed debian and HA Supervised on an old Dell Studio XPS. I look forward to expanding my knowledge of HA and linux.

SoerenNorge · October 7, 2020, 4:54pm

Thank you for this very well explained guide. I managed to install it, but home assistant doesn’t start after a reboot. Could someone guide me in the right direction?

Underknowledge · October 11, 2020, 4:03pm

when you run systemctl status hassio-supervisor.service what youre getting?

Underknowledge · October 11, 2020, 8:11pm

being lazy a.f. and into reinstalling HA a way to often I just scripted the steps.
It’s based on my needs but feel free to include or change it when you think that it is useful. I would be honored.

gist.github.com

https://gist.github.com/Underknowledge/d8301a369f573175536fc3bfb45c9eb3

debian_install_homeassistant _supervised.sh

#!/usr/bin/env bash
function info { echo -e "\033[1;34m[Info]\033[0m $*"; }
function warn  { echo -e "\e[33m[warn] $*\e[39m"; }
function error { echo -e "\033[0;31m[Error]\033[0m $*"; exit 1; }
if [ "$EUID" -ne 0 ]
  then error "Please run as root eg: 'su -', 'sudo su' or 'sudo bash'"
fi
if [ -f /home/*/.ssh/authorized_keys  ] && [ -s /home/*/.ssh/authorized_keys  ]; then
  info "found authorized_keys, disableing password login"
  sed -i -e 's/^[#\t ]*PubkeyAuthentication[\t ]*.*$/PubkeyAuthentication yes/' /etc/ssh/sshd_config

This file has been truncated. show original

SoerenNorge · October 12, 2020, 7:08am

I got it working following this guide: Autostart using systemd

fich · October 21, 2020, 9:37am

I’m a tad confused here.

Been running HA on Ubuntu 18.4 LTS, with gnome desktop, for quite a while. Right now I’m thinking about reinstall Ubuntu for a couple of reasons. And noticed this new thing about official and not.

Could anyone help me figure this out. My hardware is an old macbook pro, with desktop. And running more than hass.

If I install Ubuntu again, it’s not officially supported.
If I follow the official installation and then install more software, it’s no more officially supported.

So, since I then will end up with an unsupported installation anyway, are there any other differences between istalling on Ubuntu or Debian?

kanga_who · October 27, 2020, 9:43am

If you are doing a fresh install, you might as well use Debian. It’s a little lighter weight as an OS than Ubuntu, but it’s not really going to make a massive difference at the end of the day - you’ll be running unsupported anyway.

You could also look at using Proxmox and running HA OS in a VM, and then run another VM with Ubuntu/Other Distro for anything else you want to install, gives you the best of both worlds and is considered fully supported. This is how I run things now and it works very well.

frankfurts · October 29, 2020, 4:26am

can’t get this working on debian 10.6 keep getting errors about apparmor avahi even though they are installed

murphys_law · October 29, 2020, 4:34am

When was supervised dropped as being supported? Or are you just making the case that it is basically unsupported due to HA lack of help with these types of installs?

kanga_who · October 29, 2020, 4:36am

github.com

home-assistant/architecture/blob/413e3cb248cf8dca766c0280997f3b516e23fb6d/adr/0014-home-assistant-supervised.md

# 0014. Installation method: Home Assistant Supervised

Date: 2020-06-03

## Status

Accepted

## Context

Define a supported installation method as per [ADR-0012](https://github.com/home-assistant/architecture/blob/master/adr/0012-define-supported-installation-method.md).

## Decision

This installation method provides the full Home Assistant experience on a regular operating system. This means, all components from the Home Assistant method are used, except for the Home Assistant Operating System. This system will run the Home Assistant Supervisor. The Supervisor is not just an application, it is a full appliance that manages the whole system. It will clean up, repair or reset settings to default if they no longer match expected values.

By not using the Home Assistant Operating System, the user is responsible for making sure that all required components are installed and maintained. Required components and their versions will change over time. Home Assistant Supervised is provided as-is as a foundation for community supported do-it-yourself solutions. We only accept bug reports for issues that have been reproduced on a freshly installed, fully updated Debian with no additional packages.

This method is considered advanced and should only be used if one is an expert in managing a Linux operating system, Docker and networking.

This file has been truncated. show original

murphys_law · October 29, 2020, 4:41am

Right, so supervised with Debian is still supported as I read it.

DavidFW1960 · October 29, 2020, 4:42am

Correct supervised on Debian is supported.

poudenes · October 29, 2020, 9:26am

Here is my info. HA running on a RPI4 2GB on mSata SSD

arch	aarch64
chassis
dev	false
docker	true
docker_version	19.03.13
hassio	true
host_os	Debian GNU/Linux 10 64Bit Beta
installation_type	Home Assistant Supervised
os_name	Linux
os_version	5.4.72-v8+
python_version	3.8.5
supervisor	2020.10.0
timezone	Europe/Amsterdam
version	0.116.4
virtualenv	false

DavidFW1960 · October 29, 2020, 11:28am

~~Why did you install a beta of Debian? That is asking for trouble. You should have installed Buster…~~

Oops NVM… 64bit is beta for RPi…

unityco · October 31, 2020, 10:53pm

This is a great guide you’ve created, Kanga-Who, but it is not working for me. I’ve tried both the RPi version, and now I’ve moved on to an old laptop running Debian. I’ve followed all the steps, carefully, but always end up unable to connect to the web interface. Further reading makes me wonder if it’s a regional setting? I set for Canada, maybe that confuses something? This is what I see every time I try to install…

Also I CAN reach the Supervisor’s web interface, so something goes right; I just can’t get to the main interface!

Any additional troubleshooting tips would be appreciated!
Thank you!

DavidFW1960 · October 31, 2020, 10:58pm

Um??? There is no such thing…

kanga_who · October 31, 2020, 11:07pm

It may be a network (internal) or regional issue. I test the guides regularly myself to make sure they work as intended.

There is no Supervisor web interface. Can you provide a screenshot of what you are referring too?

unityco · November 1, 2020, 8:30pm

Apologies… wrong nomenclature on my part… the OBSERVER is what I meant…

unityco · November 2, 2020, 11:53pm

I got it working! The trick, in my case was to delete 2 lines from the code… basically the if statement around “do you want to proceed” or not. The script never waited for my response in all the previous times I ran it, so it seemed to me the interfaces file was never being overwritten. By removing the option to choose whether or not its overwritten, it seems to have done the trick!