Hello again, I was not able to describe my second issue in the previous topic and it is probably better to separate :-). I am trying to integrate one doorbel and push button in Home Assistant without success knowing that I succeded in Domoticz with the same materials. See below please Impossible…

Hello, I have search a lot before asking question. Sorry if I am not good enough or too newbie. I don’t understand your answer refering site:home-assistant.io Byron When I am searching Byron it doesn’t help me . Sorry

Hi there, I know it is quite a task find answers if you are new. I think the other helper indicated try to google Byron: https://www.google.com/search?q=site%3Ahome-assistant.io+Byron

Thanks, I am sorry. But be sure I did hours of search before posting here. Several forums, youtube, official website, documentation of RFXCOM. I found nothing regarding my problem? Certainly because I am newbie Reason why I am here to have more help from expert regarding my particular problem de…

Unfortunately, you haven’t really provided any info about what could be going wrong. All we can see is that it doesn’t work for you. We can’t even see what “it” is either because the link in your original post is dead.

[image] Sir_Goodenough: site:home-assistant.io Byron Of you open a search engine like google or duckduckgo or whatever, paste this into the search link/ site:home-assistant.io Byron You will see some of these… Guide: how to make a cheap Byron doorbell smart , Dumb Doorbell Integration To…

[image] Help with Byron Doorbell via RFXTrx Configuration Hi @seanb-uk , Thank you for helping me out here slight_smile – I was concern that the new RFXrtx RFXCOM integration didn’t work at all with my Byron Doorbell Push, but you confirmed that it indeed would/should work…

@ Sir_Goodenough Your answers are not at all helping. Sorry. As I indicated earlier, I have done a lot of search and know how to search on internet or forums. I have already seen the links mentioned and they are not treated my problem. May be I was not clear. Let me re explain : My Doorbell by…

I don’t have a RFXCOM and I don’t byron-dby-23712w, but as far as I understand HA, you will not get a device, nor an entity for your doorbell. My doorbell, with an RfLink, just receives an event when someone rings, no device, no entity, just an event. Sorry, I can’t help more. Did you read the topi…

Integration impossible ! Need help

Configuration

Sir_Goodenough ((SG) WhatAreWeFixing.Today) June 11, 2025, 4:54pm 2

Hello gilf

You seem to be struggling a bit.
This problem has been already solved in several threads here.
Try putting this in your search engine and check out the links.

site:home-assistant.io Byron