Hi, looks great and you have the same model as I have. Can you share the files as I was not able to place the battery soc … also having problems in adding to the energy tab 
for energy sensor you have to follow Integration Solar inverter huawei 2000L - #589 by yousaf465
and in case of HA 2021.9.x and later use total_increasing as state class
state_class: total_increasing
Were do we place the state class etc config?
Also can anyone help creating sensors for the battery?
thank you in advance
Have you read my above post. I have basically written step by step guide to add sensors in energy to energy dashboard.
after changing over to using dongle for data with slave:1 and SDongle_V100R001C00SPC123 firmware. total yield is totally messed up. It is not being reset each day, as was the case previously. How can I reset it to zero each day?
Total yield is never reset, it’s increasing value because it’s total production of inverter. Check if there wasn’t wrong reading of total_yield just like I get when I disconnect LAN cable. Daily yield is reset every day.
Total_yield value is correct, but I was using it to plot energy graphs. My dail yield value is fixed at 15.61 since I have been using this integration. relevant code.
sensor total:
- platform: template
sensors:
pv_total_yield:
friendly_name: "Total Yield"
unit_of_measurement: "kWh"
icon_template: mdi:solar-power
value_template: "{{ state_attr('sensor.sun2000_10ktl_m1', 'total_yield') }}"
energy_used:
friendly_name: "total energy used"
unit_of_measurement: 'kWh'
value_template: >
{{ '%0.2f' | format(states('sensor.total_yield') | float -
states('sensor.grid_exporterd_energy') | float +
states('sensor.grid_accumulated_energy') | float) }}
and
- platform: template
sensors:
pv_daily_yield:
friendly_name: "Daily Yield"
#entity_id: sensor.sun2000_10ktl_m1
unit_of_measurement: 'kWh'
icon_template: mdi:solar-power
value_template: "{{ state_attr('sensor.sun2000_10ktl_m1', 'daily_yield') }}"```Show total yield graph when it happened and attributes of inverter entity if there is also wrong value.
If I see it correctly on your screen shot total yield is 0 when inverter is in standby. For me it’s last value. You can add in total_yield template to check if the value is > 0. And I can’t help you with daily yield because for me it’s working OK.
Managed to figure it out …
- platform: template
sensors:
storage_state_of_capacity:
friendly_name: "Luna Battery"
#entity_id: sensor.sun2000_6ktl_l1
unit_of_measurement: '%'
icon_template: mdi:solar-power
value_template: "{{ state_attr('sensor.sun2000_6ktl_l1', 'storage_state_of_capacity') }}"
Hi
Is there a way to increase the frequency of polling data with the integration? For some of my purposes, more frequent polling would work better.
Thanks
Hi
i’m new to HA. I would like to create a Dashboard with a overvieuw of my installation.
I’m really struggeling on how to set up the Fusion solar Kiosk. I did succeed with installing it via Hacs.
The next step i see is to activate on the Fusion solar website. Can’t find the kiosk button to activate this…
Is there a clear explenation or guide on how to set it up?
greats
Huwaei kisok in Homeassistant?? Any screen shots or examples?
You will get in home assistant:
'Realtime Power'
'Total Current Day Energy'
'Total Current Month Energy'
'Total Current Year Energy'
'Total Lifetime Energy'
This data is with 5 minuts delay.
Just managed to find KIOSK try this: Click Home and select LIST VIEW
Then select your plant:
and you should see KIOSK
Please note that if you have the installer account it will not display the Kiosk login. My advise is to create another acconunt for example owner privilege.