Integration with Daikin Skyfi app (Air conditioning)

stavroz · March 14, 2020, 12:31am

It would be great to get this fixed up. It does work although it fills my logs with errors.

borisroz · April 17, 2020, 11:52pm

Hi Daniel, did you manage to successfully integrate Zena ? I have Zena (FTXJ35TVMAW), with integrated WiFi and D-mobile app. I have tried Deakin integration and connection is being refused. I saw somewhere on this forum that https protocol is being used for this model. Any tips ?

mynameisdaniel · April 19, 2020, 1:11am

Yeah mine’s been working beautifully with the Daikin component. Did you get the same BRP072A42 adapter?

I can access the API via http, no need for https and seems everything is up to date (firmware 3.4.3 on my adapter).

borisroz · April 19, 2020, 7:14am

Hi Daniel, my version of Zena has integrated WiFi adapter, I hope to use it, but not sure if that it possible. Did your Zena have integrated WiFi ?

mynameisdaniel · April 19, 2020, 11:17am

My Zena didn’t have built-in wifi, I had to buy that module and install it in a compartment on the indoor unit. My Zena model is FTXJ35PVMAS bought a few years ago now so maybe things have changed a bit.

fredrike · April 21, 2020, 7:16pm

There seems to be four different ways Daikin apps communicate.

BRP069Axx/BRP069Bxx/BRP072Axx (supported natively)
BRP15B61 aka. AirBase (supported natively)
BRP072B/Cxx (needs https access and a key)
SkyFi (different protocol, have a password)

It seems think that the D-mobile app are communicating with BRP072 units: https://www.daikin.co.nz/controllers/d-mobile-app-wall-mounted-only

In conjunction with Daikin’s BRP072A42 wireless LAN adaptor, the easy to use D-Mobile app lets you use your smartphone or tablet to operate your Daikin wall mounted air conditioning unit via Wi-Fi or the internet.

I’m working on adding the last two into the Daikin integration, but it is going quite slow as I need testers for the new code.

Here is a discussion on how to get 72B/C working: Daikin BRP072C42 WIFI custom component - #29 by LintHart

Anyone (ping @Borgy, @moorey81, @markss), please send me a PM so we can set up a test environment for testing pyDaikin 2.0 (with support for all known models).

borisroz · April 23, 2020, 8:15am

Thanks @fredrike. I am not sure what version of WiFi adapter I have, as it is internal, but I will try your suggestions. I am available for any testing against my Zena, if needed.

Cheers, Boris

fredrike · April 23, 2020, 8:28am

Which mobile app are you using?

borisroz · April 23, 2020, 8:31am

I am using Mobile Controller app. The Zena model is: FTXJ35TVMAW.

fredrike · April 23, 2020, 8:41am

This one: https://play.google.com/store/apps/details?id=eu.daikin.remoapp / ‎DAIKIN Mobile Controller on the App Store ?
BC, that falls under the first category (Daikin AC - Home Assistant)

BRP069Axx/BRP069Bxx/BRP072Axx

I have a BRP069B myself so that is already tested .

borisroz · April 23, 2020, 9:13am

Yes, I am using that Mobile app.

fredrike · April 26, 2020, 6:34am

Hi!

I’ve got a new version of pydaikin, it would be great if someone could test the new SkyFi support it adds. If you have docker installed it will quite easy to set up a testing environment:

docker run -it --rm python:3-alpine sh -c 'apk add --no-cache build-base linux-headers; pip install pydaikin==2.0.0.dev7; sh'

From there you can run the pydaikin app with just pydaikin -p <skyfi-password> -a <ip of device>.

stavroz · April 26, 2020, 8:24am

Ive spun that up and got this response:

/ # pydaikin -p ##### -a 192.168.1.2
Traceback (most recent call last):
File “/usr/local/bin/pydaikin”, line 111, in
daikin = loop.run_until_complete(
File “/usr/local/lib/python3.8/asyncio/base_events.py”, line 616, in run_until _complete
return future.result()
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 77 , in factory
await appl.init()
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py”, line 6 3, in init
await self.update_status(self.HTTP_RESOURCES)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 16 5, in update_status
self.values.update(await self._get_resource(resource))
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 14 5, in _get_resource
return await self._run_get_resource(resource)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py”, line 9 7, in _run_get_resource
return await super()._run_get_resource(resource)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 15 6, in _run_get_resource
return self.parse_response(await resp.text())
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py”, line 9 1, in parse_response
response = dict([e.split(’=’) for e in response_body.split(’,’)])
ValueError: dictionary update sequence element #0 has length 20; 2 is required
/ #

markss · April 27, 2020, 12:01am

Hi @fredrike

I’ve run the command through docker and here are the results:

/ # pydaikin -p XXXX -a 192.168.X.X -v
DEBUG:asyncio:Using selector: EpollSelector
DEBUG:pydaikin.daikin_base:Updating [‘ac.cgi?’, ‘zones.cgi?’]
Traceback (most recent call last):
File “/usr/local/bin/pydaikin”, line 111, in
daikin = loop.run_until_complete(
File “/usr/local/lib/python3.8/asyncio/base_events.py”, line 616, in run_until_complete
return future.result()
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 77, in factory
await appl.init()
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py”, line 63, in init
await self.update_status(self.HTTP_RESOURCES)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 165, in update_status
self.values.update(await self._get_resource(resource))
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 145, in _get_resource
return await self._run_get_resource(resource)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py”, line 97, in _run_get_resource
return await super()._run_get_resource(resource)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 156, in _run_get_resource
return self.parse_response(await resp.text())
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py”, line 91, in parse_response
response = dict([e.split(’=’) for e in response_body.split(’,’)])
ValueError: dictionary update sequence element #0 has length 20; 2 is required

I’ll dig in and have a look to see if I can see more but felt I would post this for now

stavroz · April 27, 2020, 12:51am

Hi Fredrik

I dont know if this will help. I am using splendstroms code which works to some degree, these are the errors in my home assistant log.

2020-04-27 00:43:17 WARNING (MainThread) [homeassistant.helpers.entity] Update of climate.daikin is taking over 10 seconds
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode opmode=0 tried [‘opmode’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode units=. tried [‘units’, ‘.’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode settemp=26.0 tried [‘settemp’, ‘26.0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode fanspeed=3 tried [‘fanspeed’, ‘3’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode fanflags=1 tried [‘fanflags’, ‘1’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode acmode=8 tried [‘acmode’, ‘8’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode tonact=0 tried [‘tonact’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode toffact=0 tried [‘toffact’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode prog=0 tried [‘prog’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode time=10:47 tried [‘time’, ‘10:47’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode day=0 tried [‘day’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode roomtemp=21 tried [‘roomtemp’, ‘21’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode outsidetemp=19 tried [‘outsidetemp’, ‘19’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode louvre=0 tried [‘louvre’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode zone=32 tried [‘zone’, ‘32’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode flt=0 tried [‘flt’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode test=0 tried [‘test’, ‘0’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode errcode= tried [‘errcode’, ‘’]:
2020-04-27 00:43:21 WARNING (SyncWorker_19) [custom_components.skyfi.climate] decode sensors=1 tried [‘sensors’, ‘1’]:

fredrike · April 27, 2020, 6:29am

@markss, @stavroz: I’ve updated the code and pushed a new version: docker run -it --rm python:3-alpine sh -c 'apk add --no-cache build-base linux-headers; pip install pydaikin==2.0.0.dev10; sh' should do the trick.

Try running it with pydaikin -p XXXX -a -v 192.168.X.X to get the debug logging.

markss · April 27, 2020, 7:25am

Done, results:

/var # **pydaikin -p XXXXX -a -v 192.168.X.X**
DEBUG:asyncio:Using selector: EpollSelector
DEBUG:pydaikin.daikin_base:Updating ['ac.cgi?', 'zones.cgi?']
Traceback (most recent call last):
  File "/usr/local/bin/pydaikin", line 111, in <module>
    daikin = loop.run_until_complete(
  File "/usr/local/lib/python3.8/asyncio/base_events.py", line 616, in run_until_complete
    return future.result()
  File "/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py", line 77, in factory
    await appl.init()
  File "/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py", line 63, in init
    await self.update_status(self.HTTP_RESOURCES)
  File "/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py", line 165, in update_status
    self.values.update(await self._get_resource(resource))
  File "/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py", line 145, in _get_resource
    return await self._run_get_resource(resource)
  File "/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py", line 97, in _run_get_resource
    return await super()._run_get_resource(resource)
  File "/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py", line 156, in _run_get_resource
    return self.parse_response(await resp.text())
  File "/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py", line 91, in parse_response
    response = dict([e.split('=') for e in response_body.split(',')])
**ValueError: dictionary update sequence element #0 has length 20; 2 is required**

if I put http://192.168.X.XX:2000/ac.cgi?pass=XXXXX in the browser, I get:

opmode=0&units=.&settemp=24.0&fanspeed=3&fanflags=1&acmode=16&tonact=0&toffact=0&prog=0&time=07:40&day=6&roomtemp=28&outsidetemp=0&louvre=1&zone=0&flt=0&test=0&errdata=146&sensors=1

Looking at the code (I am still learning python so I coul dbe wrong) this seems to be trying to parse the response from http into the different values.

I’ll try and dig in further later, family calls

fredrike · April 27, 2020, 7:28am

That is not from the dev8 code…

Edit:

To set up a test-environment to run my HA code the following Docker command should work:

docker run --name=hadev -p 8123:8123 -it python:3.8 sh -c 'apt-get update; apt-get install -y python3-pip python3.7-dev python3.7-venv python-wheel-common autoconf libssl-dev libxml2-dev libxslt1-dev libjpeg-dev libffi-dev libudev-dev zlib1g-dev libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libavresample-dev libavfilter-dev; git clone -b daikin-2.0 --single-branch https://github.com/fredrike/home-assistant.git /home-assistant; cd /home-assistant; git reset --hard; git pull; pip install sqlalchemy; script/setup; hass'

Then you can just go to http://localhost:8123 and set up an user and a Daikin component, be sure to fill the “Password” field as that is used to identify that it is a SKYFi unit.

To stop press ctrl-c, and docker stop hadev, then you can do docker start --attach hadev to update and run a new version.

All patience with this type of cruel testing is much appreciated.

stavroz · April 27, 2020, 10:55am

here is my logs for this version. I will give the test-environment atry tomorrow.

/ # pydaikin -p ##### -a -v 192.168.1.2
DEBUG:asyncio:Using selector: EpollSelector
DEBUG:pydaikin.daikin_base:Updating [‘ac.cgi?’, ‘zones.cgi?’]
DEBUG:pydaikin.daikin_skyfi:Parsing opmode=0&units=.&settemp=26.0&fanspeed=3&fanflags=1&acmode=8&tonact=0&toffact=0&prog=0&time=20:49&day=0&roomtemp=21&outsidetemp=19&louvre=0&zone=32&flt=0&test=0&errcode=&sensors=1
DEBUG:pydaikin.daikin_skyfi:Parsing nz=4&zone1=Bed%202%2C3%2C4&zone2=Bed%201%2C%20upsta&zone3=Family&zone4=Bed%205%2C%20lower
DEBUG:pydaikin.daikin_base:Represent: acmode, acmode, 8
acmode: 8
DEBUG:pydaikin.daikin_base:Represent: day, day, 0
day: 0
DEBUG:pydaikin.daikin_base:Represent: errcode, errcode,
errcode:
DEBUG:pydaikin.daikin_base:Represent: fanflags, fanflags, 1
fanflags: 1
DEBUG:pydaikin.daikin_base:Represent: fanspeed, fanspeed, 3
fanspeed: 3
DEBUG:pydaikin.daikin_base:Represent: flt, flt, 0
flt: 0
DEBUG:pydaikin.daikin_base:Represent: louvre, louvre, 0
louvre: 0
DEBUG:pydaikin.daikin_base:Represent: nz, nz, 4
nz: 4
DEBUG:pydaikin.daikin_base:Represent: opmode, opmode, 0
opmode: 0
DEBUG:pydaikin.daikin_base:Represent: outsidetemp, outsidetemp, 19
outsidetemp: 19
DEBUG:pydaikin.daikin_base:Represent: prog, prog, 0
prog: 0
DEBUG:pydaikin.daikin_base:Represent: roomtemp, roomtemp, 21
roomtemp: 21
DEBUG:pydaikin.daikin_base:Represent: sensors, sensors, 1
sensors: 1
DEBUG:pydaikin.daikin_base:Represent: settemp, settemp, 26.0
settemp: 26.0
DEBUG:pydaikin.daikin_base:Represent: test, test, 0
test: 0
DEBUG:pydaikin.daikin_base:Represent: time, time, 20:49
time: 20:49
DEBUG:pydaikin.daikin_base:Represent: toffact, toffact, 0
toffact: 0
DEBUG:pydaikin.daikin_base:Represent: tonact, tonact, 0
tonact: 0
DEBUG:pydaikin.daikin_base:Represent: units, units, .
units: .
DEBUG:pydaikin.daikin_base:Represent: zone, zone, 32
Traceback (most recent call last):
File “/usr/local/bin/pydaikin”, line 116, in
daikin.show_values(only_summary)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_base.py”, line 220, in show_values
(k, val) = self._represent(key)
File “/usr/local/lib/python3.8/site-packages/pydaikin/daikin_skyfi.py”, line 107, in _represent
val = list(str(bin(int(self[key])) + 256))[3:]
TypeError: can only concatenate str (not “int”) to str

fredrike · April 27, 2020, 11:16am

Great! I’ve found that error too. I think we are quite close. Would be fun to see how the HA integration comes out.