I have a couple of screens (covers) in my house controlled by Qubino z-wave shutter controls. Everything works, control icons are matchting the cover position. Only I expected HA to show the position and state (active vs inactive) inverted. When fully open (cover is up, window view is ‘open’) the state is ‘open’ but the position is 100 and the icon shows yellow, as if it is active. When fully closed (cover down, window view is blocked) the state is ‘closed’, the position is 0 and the icon shows blue, as if it is inactive.
What I want:
When cover is fully up:
position: 0
state: open
icon color: blue (not active)
When cover is not fully up (so also when just down for a little bit):
position > 0
state: closed
icon color: yellow (active)
Is any of this configurable? Most important at this moment is the icon color, I only want it to use the active color when the cover is not full up.
Hello everyone! I’m having this issue! On my smart life app everything is good, but on my home assistant everything is reversed (close opens and opens closes).
I have also saw that everything is inverted. 0% on HA is 100% on smart life app. This is the issue basically… Is there anyway to invert the % on the HA?
If it helps anyone with Qubino Zwave Shutter - the stupid/weird workaround is to to set both “Swap Inputs” (PARAMETER 3) and “Swap Outputs” (PARAMETER 5) to “Swapped” in configuration of your devices. After that the sliders show as they should in the first place.