Issue with motion blinds integration

Good day,

After using the motion blinds integration for a while now I’ve recently run into an issue. I extended the number of blinds with 3 new ones bringing the total number of blinds in my house from 14 to 17. It seems the motion blinds integration only creates devices for the first 15 blinds in the app.
Looking into the integration I see it added 1 new blind which is RollerBlind000f. So now I have:

RollerBlind0001
RollerBlind0002
RollerBlind0003
RollerBlind0004
RollerBlind0005
RollerBlind0006
RollerBlind0007
RollerBlind0008
RollerBlind0009
RollerBlind000a
RollerBlind000b
RollerBlind000c
RollerBlind000d
RollerBlind000e
RollerBlind000f

As this seems to be using hexadecimal characters for the numbering it should still create
RollerBlind0010
RollerBlind0011

As the integration is not being used by a lot of users it might be the case that nobody ever ran into this. I’m not sure if this is the right way to log this issue but please let me know if I’m not in the right place here.
The blinds are working fine from the Brel app on my phone.
I’ve removed the integration and added it back into HA.
I’m running
Home Assistant OS 7.2 on a Rpi 4 8GB
Supervisor 2021.12.2
Core 2021.12.10

Any help would be very much appreciated. If there’s anything I can do to help this topic further please let me know.

Some new information about this case. Today I removed all blinds from the Brel app/gateway. Then I recreated them all 17 again.
Now when I remove the motion blinds integration and add it back in HA it shows me new names for all blinds. Where previously I saw 15 blinds ranging from RollerBlind0001 - RollerBlind000f, now it created RollerBlind0012
RollerBlind0013
RollerBlind0014
RollerBlind0015
RollerBlind0016
RollerBlind0017
RollerBlind0018
RollerBlind0019
RollerBlind001a
RollerBlind001b
RollerBlind001c
RollerBlind001d
RollerBlind001e
RollerBlind001f
RollerBlind0020

Again only 15 blinds are created and 2 are missing. Also RollerBlind0010 and RollerBlind0011 were never visible in HA (those were probably the 2 missing curtains) and now again I would have expected RollerBlind0021 and RollerBlind0022 to be available in HA, but they’re not.

So it seems there’s some kind of limit which prevents more then 15 blinds to be synced between the gateway and HA

Hope this helps…

Me too! I have 24 blinds with same problem, only first 15 show

This issue has been resolved in the latest version of HomeAssistant 2022.03.
If you still experiance any issues, please let me know.