Issue with the Energy dashboard

since a week or two I have issue with my dashboard reporting, although the daily total kWh seems correct, the graph miss a lot of data as you can see on the screenshot below

anybody having the same issue?

on another note, I’m trying to setup some better reporting with Grafana, with the Energy dashboard I’m using this entity
Screenshot 2022-10-02 at 18.43.14

but when you get the data from them the entity, you have a large value which seems to match “current_tier1_summ_delivered: 21440” instead of the current kWh/ Watts.

I don’t understand how you can get live electricity usage or at least the current kWh (like the Energy dashboard seems to decode)

for informations that all the data I’m getting from my electric meter (but again the electric dashboard seems to have enough info with Linky EASD01/Linky EASD02)

Sensors
0x00158d0005d2a918 ADPS
Unavailable
0x00158d0005d2a918 BBRHCJB
Unavailable
0x00158d0005d2a918 BBRHCJR
Unavailable
0x00158d0005d2a918 BBRHCJW
Unavailable
0x00158d0005d2a918 BBRHPJB
Unavailable
0x00158d0005d2a918 BBRHPJR
Unavailable
0x00158d0005d2a918 BBRHPJW
Unavailable
0x00158d0005d2a918 HHPHC
Unavailable
0x00158d0005d2a918 IINST
Unavailable
0x00158d0005d2a918 IMAX
Unavailable
0x00158d0005d2a918 ISOUSC
Unavailable
0x00158d0005d2a918 PAPP
Unavailable
0x00158d0005d2a918 active register tier delivered
Unavailable
0x00158d0005d2a918 tomorrow color
Unavailable
CCASN
428 W
CCASN-1
1,798 W
DPM1
Unavailable
DPM2
Unavailable
DPM3
Unavailable
EASD01
21,440 kWh
EASD02
17,125 kWh
EASD03
Unavailable
EASD04
Unavailable
EASF01
21,440 kWh
EASF02
17,125 kWh
EASF03
Unavailable
EASF04
Unavailable
EASF05
Unavailable
EASF06
Unavailable
EASF07
Unavailable
EASF08
Unavailable
EASF09
Unavailable
EASF10
Unavailable
EAST
38,565 kWh
FPM1
Unavailable
FPM2
Unavailable
FPM3
Unavailable
IRMS1
3 A
NJOURF
Unavailable
NTARF
2
PCOUP
9 kVA
PREF
9 kVA
RELAIS
1
SINSTS
707 VA
SMAXN
8,216 VA
SMAXN-1
8,216 VA
UMOY1
230 V
URMS1
229 V
VTIC
2
Current date
E221002195026
Current price
HEURE PLEINE
Current tarif
H PLEINE/CREUSE
Message1
PAS DE MESSAGE
Message2
Meter serial number
031662997326
Site id
14245151752650
Status register
00DA4401

The energy dashboard uses the total consumption and just subtracts the current reading from the previous to get the usage in that hour. This possibly the most likely cause of missing data. For example, if the total only updates every 3 hours, the total in the intervening hours will not change, and therefore show as zero. What does the history of the underlying sensor show?

1 Like

Yes I think that’s the issue, I don’t know why because from the settings, it’s suppose to poll data every seconds

that’s what I though for the measurement but that’s probably gonna be to hard to get that working outside of the dashboard, I’ll give it a try again

thank you