KNX Unable to find service binary_sensor/turn_on

Configuration
1

Hello everyone, I know that the function “Unable to find service binary_sensor/turn_on” does not exist. But I want to make the status on my KNX Wall button with LED light up when I switch on via Home Assistant of a Mqtt job my TV Backlight. How do I have to do this.

Error: KNX Unable to find service binary_sensor/turn_on (binary_sensor.light_tvikea)

  - alias: Wohnzimmer Licht Fernseher Boolean Ein
    trigger:
      - platform: state
        entity_id: input_boolean.status_tvikea_light
        to: 'on'
    action:
      - service: homeassistant.turn_on
        entity_id: light.0x588e81fffe2a58e7_light
      - service: binary_sensor.turn_on
        entity_id: binary_sensor.light_tvikea
2

You can’t turn on a sensor. Is the led light exposed as an entity?

3

i have this one
Switch with LED with Status on/off … i will switch a mqtt light

4

That’s a pretty picture, but it doesn’t answer my question.

5

Unfortunately I cannot answer the question correctly.

I’m sorry… I know this sounds a bit complicated

I can only say that my KNX switches with built-in LED get the status from the KNX bus. I want to switch a Philips mqtt on and off.

knx:
light:

  • name: light.tvikea
    address: '1/2/75
    state_address: '1/2/75

If I use the switch in light: I lose the status after about 1 hour and the switch does not work anymore. So I tried to operate the switch in binary_sensor: mode with the problem that I cannot use my status LED from the switch anymore.

knx:
binary_sensor:

  • name: light.tvikea
    state_address: '1/2/75
    context_timeout: 1.0

See also

Translated with DeepL Translate: The world's most accurate translator (free version)

6

I’m not sure how you can affect the led in the switch, but it sounds like it should update automatically and there is some kind of bug in the integration :man_shrugging:

Sorry I can’t help any further.

7

I have a staircase timer on an actuator, which turns off after a few seconds of switching on. HA turns ON and when the time elapse it does not update the status.
At HA is a switch:

- name: Portão Garagem
  address: '0/3/4'
  state_address: '3/3/4'
8

Wait for this: https://github.com/home-assistant/core/issues/43645
Until then roll back to 0.117

9

ok. thank you very much.